Element RC 40119 Enduro Trail Truck, Trailwalker RTR, black

Item number: AW40119

BUILT TO PERFORM. When tackling a trail, you want to know that you can rely on the performance and reliability of your vehicle - the right choice is the Element RC Enduro Trail Truck!

At the heart of the enduro chassis is Associated's revolutionary Stealth® X transmission. Unlike other transmissions, the Stealth® a ratio between the front and rear axles of 1:1 (available as an accessory), and with option 2 an overdrive on the front axle of 11.83% (included in delivery).

The power is transmitted via three-part telescopic drive shafts with a middle section made of extruded aluminum, universal drive shafts on the front axle and ring gears and drive pinions made of hardened steel. With the Enduro drive train, adequate and reliable power transmission at all times is no problem at all!

The behind-the-axle handlebar (BTA) installed behind the axle optimizes the articulation angle and increases the ground clearance at the front end of the vehicle, making the vehicle much easier to move through rough terrain.

With the built-in powerful Reedy Power electronics, the Enduro Trail Truck with Sendero body is ready for off-road adventures right out of the box. The new, high-torque 16-turn 5-slot brushed motor was developed specifically for crawlers. In conjunction with the electronic Reedy Power speed controller SC480X with T-connector, this results in super-smooth control behavior and there is always plenty of power available. In order to have the powerful vehicle under control at all times on the trail, the model is equipped with our new 2.4GHz three-channel control XP130 and a Reedy Power 1320MG high-torque servo with metal gear.

Chassis features:

• BTA steering and aluminum steering plates: The steering located behind the axle improves the steering angle, ground clearance and appearance. Bolt-on aluminum steering plates increase adjustability and stability and allow for user modifications.
• Integrated mount for servo winch: Mounting the servo winch directly on the chassis ensures the strongest possible and most reliable connection on a crawler. The position next to the steering servo ensures a balanced weight distribution.
• Aluminum threaded damper: The liquid-filled aluminum threaded dampers keep the vehicle safely on track on the trail and the oil inside even in the most impassable terrain.
• Reedy Power Crawler Motor: The Reedy Power 16-turn 5-slot brushed motor offers plenty of torque with smooth power delivery. This enables slow and controlled starting as well as consistent propulsion in rough terrain and when overcoming obstacles
• Electronic Reedy Power regulator: The SC480X is a waterproof brush motor controller and is specifically designed for use in crawlers. It enables proportional forward and reverse travel, has two power supply lines, a LiPo protection circuit and is equipped with a T-connector.
• Remote control and servo: The new 2.4GHz three-channel control XP130 with receiver and the waterproof Reedy Power servo 1320MG (metal gear) with 12.5 kg/cm torque at 6 V are the perfect combination to keep the enduro under control on the trail.
• Stealth® X transmission with adjustable overdrive: The heart of the Enduro is our revolutionary Stealth® X transmission. From the outside it looks like a conventional three-speed transmission, but the inner workings are anything but conventional. With the Stealth® and rear axle of 1:1 (available as an accessory), and with option 2 an overdrive on the front axle of 11.83% (included in delivery).

Body features:

AN EYE FOR DETAIL. No trail truck would be complete without a detailed and realistic body. Accordingly, the exterior of the Trailwalker Black was based on the styling of well-known vehicles from the 1970s and 1980s.

When designing the Trailwalker body, emphasis was placed on appearance and function. The one-piece body is equipped with a roll bar, bumper, towing eyes, windshield wipers, folding exterior mirrors and radiator grille made of injection-molded plastic and has working LED headlights.

The body of the Trailwalker Black is made of robust polycarbonate and is finished with a new, matt black Scratch 'N Weather paint. With this finish, new to RTR vehicles, you can decide whether you want to let nature take its course in rocky terrain or add weathering effects to the body according to your wishes.

More features:

• CMS (Chassis Side Steering)
• Adjustable Panhard rod at the front
• Universal drive shafts at the front
• Longitudinal bars made of stamped steel
• Dust and waterproof receiver box
• 12mm hex wheel driver
• Adjustable front and rear bumper brackets
• Adjustable width sills
• Two battery boxes
• Aluminum motor plate
• Adjustable body mounts
• Optimized ball sockets for smoother axle articulation
• Adjustable rear shock mount
• Telescopic drive shafts front and rear
• Drive shaft body made of extruded aluminum
• One-piece rear axle construction
• Toothed front axle with adjustable caster
• Milled drive sprockets
• Metal ring gear and idler gears
• Milled steel main shaft
• Robust, 5 mm thick trailing arms
• Metal ball bearings

SPECIFICATIONS:

*This vehicle is fully assembled and ready-to-run. Some models may still require a battery, transmitter batteries and/or a suitable charger.