Komfort, Wertigkeit und Leistung auf höchstem Niveau vereinen sich im Comp-Ready SCX10 Pro 4WD-Kit. Das Pro Kit bietet viele Innovationen und Vorteile für Fahrer, die anspruchsvolle Linien wählen, um sich den Sieg zu sichern – sowie für diejenigen, die einfach nur mit den Besten crawlen wollen.
Key Features
- Der einfachste und bequemste Weg, einen Scale Crawler für den Wettbewerb zu bauen, mit zahlreichen Innovationen, die noch nie zuvor in einem Comp-Ready-Kit angeboten wurden.
- Das Comp-spezifische Chassis ist einstellbar, wodurch die Leistung beim Climbing, Side-Hilling und beim Break-Over optimiert wird.
- Mehrteilige Stahlrohrachsen können ein Servo auf der Achse (AMS) oder am Chassis montiert (CMS) aufnehmen.
- Die niedrige, vordere Motorposition bietet eine hervorragende Gewichtsverteilung und verbessert das Gleichgewicht.
- Der Pro war bereits bei mehreren Events mit dem Designer Wyatt Mellon am Steuer platziert.
In The Box
(1) SCX10 Pro Kit
(1) Bedienungsanleitung
Needed to Complete
(1) 2 bis 4-Kanal Surface Fernsteuerung & Empfänger
(1) Rock Crawler Motor
(1) Elektronischer Fahrtenregler
(1) Lenkservo
(1) Karosserie für SCX10 Pro Chassis
(4) Räder mit 12mm Hex
(4) Reifen für die Räder
(1) Micro Servos für den optionalen schaltbaren Underdrive
1/10 SCX10 PRO Scaler 4WD Kit
Funktionen
- Der einfachste und bequemste Weg, einen Scale Crawler für den Wettbewerb zu bauen, mit zahlreichen Innovationen, die noch nie zuvor in einem Comp-Ready-Kit angeboten wurden.
- Das Pro-Kit spart viel Zeit und Geld im Vergleich zum separaten Kauf von Komponenten.
- Das Comp-spezifische Chassis ist leichter, niedriger und besser einstellbar, wodurch die Leistung beim Climbing, Side-Hilling und beim Break-Over optimiert wird.
- Mehrteilige Stahlrohrachsen können ein Servo auf der Achse (AMS) oder am Chassis montiert (CMS) aufnehmen.
- Die niedrige, vordere Motorposition bietet eine hervorragende Gewichtsverteilung und verbessert das Gleichgewicht.
- Stelle die Hinterachse per Servo auf Underdrive oder wähle manuell zwischen 1:1 und Underdrive an der Hinterachse.
- Neue 96-mm-Aluminium-Öldruckstoßdämpfer mit glattem Gehäuse bieten mehr Bodenfreiheit.
- Der Pro war bereits bei mehreren Events mit dem Designer Wyatt Mellon am Steuer platziert.
The best of the best scale comp crawler kits.
Axial ist nicht nur die Marke der Wahl für Wochenendfahrer, sondern liefert auch Produkte auf anspruchsvollstem Wettkampfniveau. Mit dem SCX10 Pro 4WD im Maßstab 1:10 folgt Axial dem Ruf nach einem innovativen, einfach zu bauenden Scale Crawler-Kit, um Wettkampfambitionen mit Spitzenleistung auf den Trails zu wecken. Jede Komponente am Pro-Kit wurde entwickelt damit du Wettbewerbe gewinnst, indem auch schwierige Linien leichter zu bezwingen sind.
Das leichtere, niedrigere und hochgradig einstellbare Aluminiumplatten-Chassis des SCX10 Pro 4WD ist für Crawlen auf Wettbewerbsebene besonders für Climbing, Side-Hilling und für Break-Over Anstiegen optimiert. Die 3-Lenker-/4-Lenker-Aufhängung, neue ölgefüllte Aluminium-Stoßdämpfer und Kugellager rundum sorgen für eine reibungslose und stetige Leistung.
Mehrteilige Pro45-Achsen mit Stahlrohren können ein an der Achse montiertes Servo (AMS) oder ein am Chassis montiertes Servo (CMS) aufnehmen, um den Scale Look zu verbessern.
Die Motorhalterung positioniert den Motor deiner Wahl tief und vorne im Chassis für eine hervorragende Gewichtsverteilung und bietet die erforderliche Balance, die ein Umkippen verhindert, während du schwierige Linien bezwingst.
Das Getriebe ermöglicht es dir, die Hinterachse manuell oder mit einem Servo um 40% zu untersetzen. Der Underdrive der Hinterachse ermöglicht einen engeren Wenderadius und reduziert die "Drehmomentverwindung" an Steigungen.
Durch den Wegfall der Stoßdämpferfeder und des Kragens von der Außenseite des Stoßdämpferkörpers bieten die neuen glatten Öldruck-Stoßdämpfer aus Aluminium mehr Freiraum, wenn du den vergrößerten Lenkwinkel des SCX10 Pro nutzen möchtest. Der Augenabstand der Stoßdämpfer beträgt 96 mm und es werden Federn mit 12 mm Durchmesser verwendet. Die untere Stoßdämpferkappe mit zwei O-Ringen fungiert als oberer Federhalter, während die untere Stoßdämpferschale über einen integrierten Anschlagpuffer verfügt, der zur Feinabstimmung deiner Federung eingestellt werden kann.
- Charger: Sold Separately
- Differential: Locked
- Power Type: Electric
- Product Weight: 3lbs (1.4kg) Without Components
- Vehicle Type: Rock Crawler
- Servos: Sold Separately
- Shock Type: 2.9" - 3.8" (74-96mm) Aluminum Oil filled
- Receiver: Sold Separately
- Gear Pitch: 32-Pitch
- Approximate Assembly Time: 5-7 Hours
- Product Width: 9.25" (235 mm)
- Radio: Sold Separately
- Battery: Sold Separately
- Ground Clearance: 2.25" (57.1mm)
- Internal Gear Ratio: 10.26:1, 15.33:1
- Motor Size: 540/550 recommended
- Product Length: 16.65" (423 mm)
- Steering Type: 2WS
- Suspension: 3-Link/4-Link
- Final Drive Ratio: 38.46:1, 57.50:1
- Speed Control: Sold Separately
- Wheelbase: 12.5" (318 mm)
- Body: Not Included
- Brakes: Integral with ESC
- Pinion: 13T
- Scale: 1/10
- Ball Bearings: Complete Vehicle
- Chassis: Aluminum Plate
- Completion Level: Kit
- Drivetrain: 4WD
- Product Height: 7" (178 mm)
- Wheel Hex Size: 12mm
Farbe
- Ohne Karosserie
- 4WD
- Ohne
- Bausatz
- Axial SCX10 PRO
- 1/10
Antrieb
Motor
Ausführung
Modell
Maßstab