Feature:

1. There are XLR DI output interface, 3.5mm auxiliary audio interface and 3.5mm headphone monitor output interface on the left side of the effector. There is a 6.35mm mono input interface, a 6.35mm output interface and a 6.35mm dry signal output interface.
2. You can use the pre/post switch to select DI (XLR DI out interface on the left). The output signal requires the unprocessed dry signal (front) or the wet signal processed by this effector (rear). You can use the boost/GND switch to select the ground control to eliminate ground ring noise.
3. On the operation panel, you can use the DI Wave switch to choose whether to close the box simulation function of the DI out interface (left XLR output interface) and the 3.5mm headphone output interface.
4. The output shift switch is used to select whether to close the box simulation function of the output interface (rear output interface).
5. The drive step pin can be used to activate or deactivate the overload function. Long press this key to activate or deactivate the noise gate function.

Specification:

Item Type: Bass Preamp+DI Box Effect
Material: Metal

Frequency: 48KHZ
A/D Conversion Accuracy: 32 bits
Signal Processing Accuracy: 32 bits
Frequency Response Range: 20HZ-20KHZ -±1dB
Noise Level: -93dBu (A-weighted)
Intermediate Frequency Signal Range: 150Hz-940Hz
Dynamic Range: 100dB
Input: +14dBu
Output: +14dBu
Power Supply: 9V DC external positive and internal negative [optional power adapter ACD-006A (NOT included)]
Current: <150mA

Package List:

1 x DI Box

1 x Manual