This is a discontinued material that I am offering for a discount. We have enough to make about 15 slings and will not be able to match the material in the future. Sometimes people order one piece as material wears out. If that is the case the other listing has material options that will be around in the future. This material is a little textured and slightly softer than typical sling material.

CUSTOM MADE SLINGS FOR PATIO FURNITURE MADE IN 3 DAYS. Our online competitors will take 4-6 weeks. If you order it is always helpful to send some pics. When you order give us the size and material color in "MESSAGE TO SELLER." If you forget you can always send a message to seller by clicking on the "CONTACT SELLER" link in the listing. Ebay sometimes blocks the message because it has a lot of number and they think you are sending a phone number. If you sent dimensions and I ask for them the message was blocked by Ebay.

 

We only make RECTANGULAR or SQUARE slings with a single hem on each side. Some chairs with 2 pieces of material are a little skinnier in the back or bottom and require a trapezoid shape sling. We do not make these.

SLINGS WE DO NOT MAKE:
1.   Some furniture is wider at one end than the other or skinnier in the middle. Sometimes it is not noticeable, so please double check your width at the top, center and bottom. If the difference is under .5" at the top, center, or bottom this is a rectangular sling and one side has stretched more than the other. 20 years ago when the first sling furniture was made some styles were a relaxed fit which means the material has a little sag in it.  Normally at least 1 channel of the furniture is bolted to the frame and removable. If both channels cannot be removed you have the relaxed fit style and the old sling needs to be removed to determine size.
2.   We do not sew slings that have 2 sides like a pillow case. Some brands with this style are Homecrest and Samsonite.
3.   We do not sew padded slings with cushion material sewn into the sling.
4.   One piece lounges. Some lounges have one continious piece of material for the seat and back. We do not sew one piece lounges. You can easily convert a 1 piece lounge to 2 pieces.

Shipping:  We ship via USPS priority mail, so your order will arrive quickly. 

Every style of chair is a different size, so each order is custom made. These are not returnable. I would recommend watching a Youtube video on how to measure and install the sling before ordering.


Thank you


Measuring Instructions

Follow these instructions before beginning

Only Measure the material while it is still in the frame and fully stretched out.

All slings are made to your specifications. Since they are custom made so they cannot be returned. If an error occurs in measuring we may be able to reuse the existing piece of material, however shipping charges and handling will apply. We recommend measuring twice and use an extremely flexible tape for the length to follow the contour of the chair. We sew in ¼” increments and only make rectangular or square slings. It is helpful to draw a rectangle representing the sling on paper to record your measurements. At any point if you are unsure don’t hesitate to call for advice.

1 Piece Chair or Ottoman

Measure Top & Bottom Width

1)      Locate the channels on each side of the furniture running top to bottom which the material slides into.

2)      Sometimes a chair is a little wider at the very top or bottom so take these measurements 3” from the top and bottom. Measure from center of one channel to the other rounding to the nearest ¼”. It’s better to round the measurement wider than skinnier. Record the size.

3)     Double check your measurement. We only sew rectangular slings.

Measure Length

1)      It is best to use a skinny very flexible tape for the length because of the curves.

2)      Start at the top and follow the contour of the furniture to the bottom. Be sure to press the tape tightly against the contour and follow the flow of the furniture. Record the size rounding to the nearest ¼”. Round longer than shorter.

3)      Double check your measurement.

2 Piece Chair or Lounge (2 piece chair has additional fee of $14)

Note the seat area may be wider than the backrest. 2 Separate measurements are required which are the backrest and seat.

BACKREST

Measure Backrest Top and Bottom Width

1)      Locate the channels on each side of the furniture running top to bottom which the material slides into.

2)      Measure from center of one channel to the other rounding to the nearest ¼”. It’s better to round the measurement wider than skinnier. Record the size.

3)      Double check your measurement. They need to be the same. We only sew rectangular or square slings.

Measure Length

1)       It is best to use a skinny very flexible tape for the length because it may have a curve.

2)      Start at the top and follow the contour of the furniture to the bottom. Be sure to press the tape tightly against the contour and follow the flow of the furniture. Record the size rounding to the nearest ¼”. Round longer than shorter.

3)      Double check your measurement.

SEAT – Same procedure as the backrest

Measure Seat Top and Bottom Width

1)      Locate the channels on each side of the furniture running top to bottom which the material slides into.

2)      Measure from center of one channel to the other rounding to the nearest ¼”. It’s better to round the measurement wider than skinnier. Record the size.

3)      Double check your measurement. They need to be the same. We only sew rectangular or square slings.

Measure Length

1)      It is best to use a skinny very flexible tape for the length because it may have a curve.

2)      Start at the top and follow the contour of the furniture to the bottom. Be sure to press the tape tightly against the contour and follow the flow of the furniture. Record the size rounding to the nearest ¼”. Round longer than shorter.

3)      Double check your measurement.





Tropitone brown jordan mallin winston hampton bay lowes alumont loyd flanders lloyd malin