600-405 Pair 4-Wheel Drive 4WD Hub Locking Actuator Delete Kit Compatible With
Locking hub make to engage/disengage the front wheels from the front axle shafts. The locking hub actuator transfers or blocks the output from drive shaft to the front wheel end according to the vacuum pressure. When the 4WD system is not engaged,the lock hub actuator will disconnect the axle and hub,then reducing driveline loss coused by spinning axle is not rotating. If your vehicle is equipped with locking hubs and the have suffered failure, you’ll notice that selecting your 4 wheel drive won’t send drive power to every wheel. You may hear a grinding or slipping noise when the hub fails to properly engage, your four-wheel drive will not be able to engage properly. Then repalcing a new 4x4 Locking Hub Actuator is nessarry to ensure safe drive. Customers can find the product you need accurately according to the OE part number. This is a compatible replacement part manufactured our factory. Associated vehicle models and part numbers are used in this listing only to identify the vehicles this Locking Hub fits. Replacement Part Number: 2003-2015 For-d Expedition 4WD 2015 For-d Expedition AWD 2004-2015 For-d F-150 4WD 2008 For-d F-150 AWD 2010-2012 For-d F-150 AWD 2006-2008 Lincoln Mark LT 4WD 2006-2008 Lincoln Mark LT AWD 2003-2015 Lincoln Navigator 4WD 2003-2015 Lincoln Navigator 4WD 2005-2008 Lincoln Navigator AWD 1. Take off hubcap if your truck is equipped with large flat blade screwdriver or prybar. No need to remove wheel. 2. Pull out the retaining ring. 3. Firmly grasp the lockout portion of the hub, wiggle up and down while pulling away from the vehicle. 4. Install propernew locking hub in reverse order of previous steps. Product Description
What is it?
For exact years and models, please check compatibility.
How to Replace the Locking Hub?
5.83 inches x 5.94 inches x 5.51 inches. Weight: 2.48 lb
Item Weight
2.48 pounds
Size
Pair
Package Dimensions
5.94 x 5.83 x 5.51 inches