Applications
●DIY, no matter where you like to decorate (except sealed metal parts),
such as your kitchen, dining room, bedroom, washroom, stairs, garage, basement, windows, cabinets, TV background wall, etc.
●It is also applicable for scenes of holidays, parties, and celebrations
●It is really cool to decorate your bikes with our strip lights
Features
●Environmental friendly; without harmful substances or radiation; Safe for children.
● USB cable, super adhesive backing tape, and easy to use.
●After cutting the strip lights, the part that does not connect to the power supply will not be used.
●24-Keys Remote Controlled
1) Brightness “+” or “-”, When lighting 16 single colours, you can adjust the brightness of the light through the remote control.
2) FLASH: 16 colour jumpy change.
3) STROBE: white fade in or out.
4) FADE: 16 colour fade change.
5) SMOOTH:16 base colour jumpy.
Specifications
LED Colour: RGB
Type: USB LED Strip Lights
Strip Length: 1M 3.3FT/ 2M 6.6FT/ 3M 9.9FT /5M 16.5FT
Strip Width: 1 cm
USB Cable Length for Bluetooth Module: 40cm
USB Cable length for Remote Control Module: 45cm
Option of 24-key IR remote controller or Bluetooth App
4 Light Mode: RGB transition / RGB strobe / RGB gradient / RGB smooth change;
Colour changing ,brightness adjustment
Package include
● 1 x 5/10/20M Led Strip Light
USB Connector module
● 1 x Remote Control(battery included）(No Remote if Bluetooth option is selected)
Troubleshooting
1. Please make sure the LED lights are connected to the power source in the right way.
Please unplug the led strip light and usb wire connector and re plug them the other way. It only works if they are connected in the right way. An arrow should be pointing at each other. Also, please check if the power source is right. You can check them by connecting to any other power source or usb port.
2. For Bluetooth options, you have to download 'DuoCo Strip' app from the app store on your iOS or android device, and then you have to give permission to your device to connect via bluetooth Once the bluetooth connection is established via the app, then you can control the Led Lights.
Instructions regarding the app DuoCo Strip are also included in the retail pack.
3.For the remote control version, when operating the remote, point it towards the usb connector of the strip lights. If the lights are turned on and remote not working, then please follow these 3 easy steps.
Please check if the plastic strip from the remote is taken out as it is there to stop battery drainage. If it still doesn't work, then please take the batteries out from the remote and re insert them. Lastly, press the middle buttons a little harder a couple of times.
4. Tape Under the thin top peel, there is a double-sided tape. There is no stickiness itself on the led strip lights, so please do not peel off the double-sided tape. (You can stick it back in case you took it off accidentally).
If you can carefully peel the top layer of the tape, you can see the double-sided tape. Only the thin top peel should be taken off, and the double-sided tape should stay with the strip