I have spent a lot of time and effort to design these to be as accurate to the original as possible. We call it the Fanasonic. These are 75% of the  original size and measure approximately 6" wide, 8" tall and 2-1/2" deep. They come in the three most common colors, YELLOW, RED and BLUE. These are 3D printed and consist of 13 individually 3D printed parts.  Other colors are available and can be printed upon request for an additional $5 and will take 3-5 additional days to print assemble and ship. 

These each take around 8 hours to print all of the components, and a couple of hours to assemble. I am not getting rich off of these, they are more for fun and enjoyment. 

The Bluetooth speaker is powered using a standard USB phone charger (not included). These have and AUX input or can easily connect to your phone, play from music files stored on micro SD cards or thumb drives for MP3s. This even has a built in FM radio tuner. 

Things to note:

These are 3D printed so there are print lines and minor flaws. I have done my best to match the original colors but they vary depending on the filament materials. Please look at the pictures carefully so you can see what they look like.

The plunger handle does move up and down but does not change anything

The track number is fixed and just shows the number 1 and does not change if you press the plunger.

The volume knob is just for show

The 8-track tape door does not open

Please feel free to ask any questions. Thank you for your interest.