NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)


Small Size Metal Housing and Mini 4PIN Connector:

NATIKA rear view camera WD-011 with small size:1.06*1.06*0.827 inch and solid materials A grade zinc alloy housing.Smaller 4PIN connector for convenient installation, Ours is 5MM/0.197in,the most of others are 12MM/0.473in. 7MM/0.276in difference!

High Resolution and Great Night Vision:

NATIKA reverse camera WD-011 built-in the latest 1/2.7inches high sensitive CMOS and Digital high-definition image processor, it is maximum Pixels 1280*720, and effective 960*576 pixels at 25 fps,also with grade A 6G All-glass,F1.8 large aperture lens,delivers great sharp and clear image in day and night. The TVL of WD-011 is up to 900TVL. For the different output format, the rear view camera WD-011 output is 600TVL, but it is much more clear than the other brand cameras whose original resolution is 420TVL,480TVL and 520TVL. It support great night vision function,the minimum illumination is 0.01Lux,will give you a clear view at night!

Super Wide View Angle:

NATIKA reverse camera WD-011 built-in a Grade A 6G All-glass and F1.8 large aperture lens, the lens' horizontal angle is 145 degrees(visible range up to 95%), thanks to the 145° horizontal view field, you'll be able to see far more than you could in the rear view mirrors alone. It helps you to decrease blind zone accidents very well.

Adjustable View Angle:

NATIKA rear view camera WD-011 with 3pcs different size gaskets/shims, when you need to adjust the view angle,please choose one suitable size gasket.Different mounting height have different view angle,after your installation, please check if the view angle is great, if not good, please choose a suitable size gasket/shim to solve it.

Easy Installation:

1.Find a a flat surface(parallel or perpendicular to ground) for mounting camera,then secure the nuts and bolts in place.

2.Connect the power wire of backup camera to the power of reversing light.

3.Connect the 26ft extension wire of backup camera to the head unit of vehicle.

NOTE:

1).Please test the backup camera before routing 26ft extension wire from back to front.

2).If your head unit without A trigger wire, then no need to use B trigger wire

3).Start the vehicle and gear on reverse to test