This listing includes the Macintosh Plus 1MB with the keyboard and mouse, a Hard Disk 20, an Image Writer with instruction books, & Floppy Disks for Mac Write and Mac Paint. Been in storage and well kept. A complete set of everything!!

 Macintosh Plus computer is the third model in the Macintosh line, introduced on January 16, 1986, two years after the original Macintosh and a little more than a year after the Macintosh 512K, with a price tag of US$2,599

The Macintosh Plus was the last classic Mac to have an RJ11 port on the front of the unit for the keyboard, as well as the DE-9 connector for the mouse

The Mac Plus was the first Apple computer to utilize user-upgradable SIMM memory modules instead of single DIP DRAM chips. Four SIMM slots were provided and the computer shipped with four 256 KB SIMMs, for 1 MB total RAM.

The Mac Plus has 128 KB of ROM on the motherboard.

It was the first Macintosh model to include a SCSI port,It is the earliest Macintosh model able to run System Software 5System 6, and System 7, up to System 7.5.5, but not System 7.5.2.
MemoryMB RAM, expandable to 4 MB (150 ns 30-pin SIMM)
Display9 in (23 cm) monochrome, 512 × 342
Graphics72 ppi
DimensionsHeight: 13.6 in (35 cm)
Width: 9.6 in (24 cm)
Depth: 10.9 in (28 cm)
Mass16.5 lb (7.5 kg)

Hard Disk: This is one of Apple’s first external hard drive developed for the Macintosh. Made for the 512K, the hard drive uses the external floppy port. It also has a port that you can plug another HD20 or your floppy drive into, so you don’t lose the use of your external disk drive. This is not a SCSI hard drive inside or out.

The Hard Disk 20 holds a whopping 20MB of data which is over 50 times the space of a 400K 3.5″ disk. It also introduced us to the Hierarchical File System (HFS). Start up from a floppy disk is required for the 512K, but with the 128K ROM, the 512Ke and Plus can boot directly from it.

Memory20 MB
ConnectionFloppy drive port at 500 kbit/s[1][2]
Power consumption30 W
Weight7 lbs (3.2 kg)
Dimensions3.1 x 9.7 x 10.5 inches (7.9 x 25 x 27 cm)

 ImageWriter is a serial-based dot matrix printer introduced by Apple Computer in late 1983.

The printer was essentially a re-packaged 9-pin dot matrix printer from C. Itoh Electronics (model C. Itoh 8510, with a modified ROM and pinout), released the same year. It was introduced as a replacement for the earlier parallel-based Apple Dot Matrix Printer/DMP (also a C. Itoh model) and, while primarily intended for the Apple II, worked across Apple's entire computer product line. The ImageWriter could produce images as well as text, up to a resolution of 144 DPI and a speed of about 120  CPS (characters per second). In text mode, the printer was logic-seeking, meaning it would print with the head moving in both directions while it would print only in one direction for graphics and Near Letter Quality. The ImageWriter was also supported by the original Macintosh computer, the Macintosh 128K. Apple wanted a graphical printer for the Mac, and had introduced the ImageWriter primarily to support the new machine. This permitted it to produce WYSIWYG output from the screen of the computer, which was an important aspect for promoting the concept of the GUI and, later, desktop publishing. The ImageWriter could be supported by Microsoft Windows-based PC's by using the included C. Itoh 8510 compatible driver.

TypeDot matrix
Slotsnone
ROM32 KB
PortsSerial
Power consumption180 Watt
ColorNo
DPI144
Speed1-2 page per minute
Weight19 lbs.
Dimensions(H × W × D) 4.8 × 16.2 × 11.8 in