9IMOD F4 V3S PLUS Flight Control FC Support BetaFlight/INAV Built-in Barometer OSD 5V 9V Dual Output 4in1 BLS-50A/60A ESC Stack for Mark4 7in Frame RC FPV Drone Quadcopter
1. Betaflight F4 V3S PLUS FC flight controller board and 4in1 ESC for RC FPV drone.
2. Size: Mounting Holes: 30.5x30.5mm, M4.
3. We updated the FC. Built-in barometer for accurate height calculation.
4. High Performance: F4 V3S PLUS also has onboard 5V and 9V BEC output, which supports DJI air unit power supply and provides stable power supply voltage for external devices such as receiver, vtx and camera.
5. Durable Material: Made with premium materials, the flight controller is built to withstand tough flight conditions, ensuring long-lasting durability and reliability.
Descriptions:
Flight control using the most common on the market F4V3 series of flight control F4V3S PLUS, all interfaces and solder joints have been re-arranged to optimize the layout, more convenient to install the welding line, more practical. On-board filtering of the flight control, OSD output image ripple reduction, the picture is pure and clear.
Specification:
F4 V3S PLUS FC
Item name: F4 V3 PLUS Flight Controller
Mounting holes: 30.5x30.5mm
SBUS, CRSF, IBUS, SPEKTRUM 1024/2048, XBUS, SUMD ports
SUMH RX built-in inverter, 3.3V SPEKTRUM satellite receiver
Support PPM RX, Default receiver input is UART6.
50A 4-in-1 ESC
Size: 41*39.5*5mm
Hole distance: 30.5*30.5/5mm (3mm hole diameter after installing the shock-absorbing ball)
Weight: 13g
Input voltage: LIPO 2-6S
Continuous current: 50A
Maximum current: 55A (10 seconds)
Processor: EFM8BB21F16G
Firmware: BLS J_H_30_REV16_7
Drive signal support: DShot300-600/Multishot/Oneshot/PMW
Current sensor: Support
60A 4-in-1 ESC
The installation size is 30.5mm*30.5mm, the mounting hole is M4
Weight: 13g
Input voltage: LIPO 2-6S
Continuous current: 60A
Maximum current: 70A (5 seconds)
Firmware: BLS J_H_30_REV16_7
Processor: EFM8BB21F16G
Package List:
As your choose
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
