WIEZ 2023 MODEL GPS WIRELESS DOG FENCE DEVICE
This intelligent wireless fence system is a new type of product to the market, with a lovely design, shape, and simple operation. It’s capable of reliably protecting your pet using dependable containment within set boundaries. If the dog exceeds the set activity range, the vibration training function will automatically warn the dog back to the safe area.
PRODUCT FEATURES
Wireless:you don't need to dig to bury wire in your yard.
Protable: the size of our GPS device is merely 3.1*1.7*1.2inch. It uses a GPS location technique, therefore has no need for a transmitter.
Rechargeable: the battery can support the device working continuously for 15 hours.
Waterproof:the device is moderately IPX4 waterproof, but it CANNOT be immersed in water.
Long Distance Control:the control radius distance is 65-3,281 ft (radius).
Outdoor Use:the GPS wireless dog fence is made for OUTDOOR USE only.
Safety Certification:It CONFORMS to UL 62368-1 and CERTIFIED to CSA 62368-1.
WIEZ GPS WIRELESS DOG FENCE FOR ALL DOGS
dog fence
EQUIP WITH WIEZ DOG FENCE, KEEP YOUR DOGS FREE AND SAFE.
Our WIEZ GPS wireless dog fence can cover a sufficient area to allow your pet to roam, explore and play. The vibration intensity can be adjusted in three levels and allows for 32 training modes. Set it up once, and the latest model has a full memory function. There is no need for daily setup, in contrast with the traditional wireless dog fence system devices with a transmitter boxes. WITH OURS, you also won't face any INTERFERENCE issues! This means that if your pet stays outdoors, the collar will keep on working - you won't have to continually reset it!
HOW TO SET UP THE GPS DEVICE?
wireless dog fence
Long Press P Key
A long press of the power key "P" turns on the device. Waiting about 1-3 minutes until the numbers of the satellites reaches six or more allows the device to work most proficiently.
dog fence
Press M Key
[Distance Adjust Mode]A long press(about 3 seconds)of the mode key “M” to enter the distance setting mode, and the sign "02" (20 meters) will flicker.
[Alarm Adjust Mode]A short press of the mode key "M" allows setting of the alarm mode. There are three alarm modes, beep, vibration and shock.
wireless dog fence
Press Up and Down Arrow Key
Use the up and down arrow key to adjust the boundary range in distance adjust mode and to adjust the strength of the beep, vibration, or shock in alarm mode.
dog fence
Test the Electric Shock
First, turn on the device. Then, press and hold the up and down arrow keys on the Searching For Satellite Signal screen (the flashing screen displaying "00"). The GPS device will beep, vibrate and generate a shock in turn. The light of the test tool will flicker to indicate the test is in process.
HOW DOES THE GPS DEVICE WORK WHNE YOUR DOGS IS OUT OF THE SET RANG?
DOG FENCE
TRAIN YOUR DOG BEFORE NORMAL USE
Train your dog with this product several times before normal use, and do not use it for more than 4 hours the first time. Do not put the collar on the dog for more than 10 hours a day during normal use.
Dogs have an adaptation period of approximately 7 to 10 days. Training your dog well before using the product will result in the most success. The animal must be trained to understand the meaning of the beeping and vibrations.
dog fence
WHAT'S THE MINIMUM RADIUS OF THE BOUNDARY?
The minimum radius of the boundary is 65ft (20m), and the maximum control radius distance is 3,281ft (1,000m).
fence
WHAT IS THE SIZE OF THE GPS DEVICE?
The size of our WIEZ GPS collar receiver is 3.1*1.7*1.2 inch, and the adjustable size of collar is from10 inch to 22 inch. Our GPS device is not suitable for very small dogs (normally, those with weight under 10lb).
chargeable
HOW TO MAINTAIN THE LAST POSITION？
To maintain the last position of the GPS wireless dog fence for next time, please keep the device powered on when charging after each use. If the device remains powered on and does not shut down, it will default to the last set position.
Even if your device is always charged before the battery runs out, boundaries may drift, and errors may be produced due to satellite drift after 4-5 days of uninterrupted operation (during which the device is not restarted). This may confuse the dog. To avoid this problem, we recommend restarting the device every 4-5 days (to reset the center point).
It should be noted that if the equipment is shut down accidentally during use, the center point will need to be reset. In short, the center point must be reset whenever the device is shut down and restarted.