Philips 8W/10 fly-killing insect killer light trap light tube
The products are imported from the Netherlands, imported from Poland and other small batches, but they are all original foreign products. Philips quality is trustworthy.
Brand: Philips Philips
Model: TL8W ACTINIC BL
The wavelength range is from 350nm to 400nm.
Peak value: 365nm
Total length: 300mm
Pipe diameter: T5 16mm
Origin: Poland
Life expectancy: 2000 hours
The Lipu TL/10R series curing plate lamp is a UV-A fluorescent lamp with a reflective layer. It belongs to the R-type reflector lamp system and can be interchanged with other lamps in terms of mechanical, electrical and working conditions. The TL/10 series emits ultraviolet light in the UV-A band. The range is from 350 nm to 400 nm and its peak wavelength is 365 nm. Wherein the ratio of UV-B/UV-A is less than 0.1% (UV-B: 280 nm to 315 nm). The R type (reflective type) has a 200 degree internal reflection layer. The internal reflective layer increases the efficiency of the lamp and is particularly suitable for situations where the radiation distance and the lamp arrangement are dense. With the TL/10 series, the mounting density of the lamp can be increased (the optimum distance between the centers of the lamps is 30 mm), which increases the radiation intensity and improves the irradiation efficiency.
The PL-S lamp is made up of two fluorescent tubes with a diameter of 10 mm. The lamp holder is equipped with a specially modified starter that provides instant start-up and is equipped with a capacitor that is connected to the line connecting the two pins. Like other PL-S lamps, they can be used with their universal ballasts.
Uses: shadowless glue, UV glue, ink curing, cold light source printing, actinic, insect trapping and so on.
note:
1. When using UV lamps, the instructions for use and safety regulations must be observed.
2. When replacing this lamp on an existing device, the exposure time must be adjusted accordingly as recommended by the manufacturer.