The CoroMill 210 is a very productive roughing concept to use when high metal removal rate is the first priority. A 10 degree entering angle allows extreme feed rates when face milling. This directs the cutting forces in an axial direction which provides a stable cutting action and no vibration tendency. High table feed due to the chip thinning effect - high productivity. First choice face milling cutter in long overhang machining. Multipurpose tool. Face milling, boring possibilities, ramping and plunge milling. Application: High feed face milling- long overhang machining, roughing with high productivity, 10 degree entering angle results in favorable cutting forces directed towards the spindle. Plunge milling- when the tool overhang is greater than 4×D, when the stability is poor, for semi-finishing in corners, for difficult-to-cut material such as titanium. Circular ramping. Diameter range: 25-160 millimeter. ISO application area: steel, stainless steel, cast iron, heat resistant and titanium alloys, hardened material.