Floor And Tunnel Shield; 21 in. x 2 ft. [3.5 sq. ft.];

Design Engineering 50501 Floor And Tunnel Shield


Description

Floor And Tunnel Shield; 21 in. x 2 ft. [3.5 sq. ft.];

Sound Damping Material

Floor And Tunnel Shield

Floor And Tunnel Shield; 21 in. x 2 ft. [3.5 sq. ft.];


SPECIFICATIONS:
  • Overall Length: N/A
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
  • Width: 24.000 in. (2 ft.)

FEATURES:
  • Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
  • Blocks Radiant Heat From Entering Driver Compartment
  • Withstands Direct High Temperatures Up To 1750 Degrees
  • Serves As A Barrier To Unwanted Road/Tire And Engine Noise
  • Constructed From 10 Mil Aluminum
  • Easy To Form To Shapes And Contours
  • Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
  • Adheres To Almost Any Surface/Material/Fiberglass
  • Minimum Clearance Required Only 3/16 in. Thick
  • Just Trim Peel And Stick

Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.

Design Engineering, Inc.(TM) is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Product Details

Sku BGWZ50501
Brand Design Engineering
MPN 50501
UPC 607078505019
For full warranty details, please contact our Customer Service Department
Orders will be shipped within 1 business day and delivered within 5 business days, once payment has been received. There may be exceptions to delivery due to location, product availability, weather conditions and emergencies. Carriers we use but not limited to are USPS, UPS, FedEx, and freight carriers for larger/heavier items (separate tracking #s are required for these). Shipping confirmations are emailed to your eBay email address. Note: We do not ship to PO box addresses currently.
Order payments are done solely through PayPal at this time. Make sure your shipping address is up-to-date/correct before you complete your checkout. For incorrect shipping addresses, your order will be returned to sender and you will be responsible for return shipping amounts, and restocking fees. Once your order is picked, shipping addresses can not be changed.
30-day return policy (items must be returned in original package, unopened, unused) full money back guaranteed. Buyer remorse, altered/or used items may be subject up to a 20% restocking fee. Please ensure item fits your vehicle, if in doubt please check with manufacturer or contact us with the year, make, model and trim of your vehicle to confirm fitment. Items deemed defective we pay for return shipping within the 30 days. If defective after this period, it would fall within the manufactures warranty and would go direct to them. Items deemed Damaged or damaged in transit a photo of damaged item and shipping box are required. A claim is filed, and we pay for return shipping. Items deemed missing/or lost in transit from carrier, a claim must be filed. Refunds for these claims may take up to 10 business days to refund. Note: Photos do not always represent the actual product. For kits, photo might show entire kit and listing is only for one component. If in doubt, please reach out to our customer service team.
Positive feedback is very important to us and helps everyone keep prices more affordable online. If for any reason you are not happy with your order or service you received, please reach out to our customer service team to resolve this issue. Please allow a 2-day business timeline. Prices and quantities can fluctuate daily. We have the right to cancel/refund orders as needed. In these cases, customers will always receive 100% of their funds back.

ShopEddies

Copyright © ShopEddies