Guten Tag!Herzlich willkommen im sz0818132!

Note:this Product Comes with a European Standard Plug. As Shown in the Figure Below:

Note:this Is a Lightweight Version,Compared with the Standard Version, It Is More Economical and Affordable,Suitable for Small Containers Within 1 L. Before Use, the Breathing Mouth Must Be Replaced, Otherwise the Product Will Explode.


Specifications:

 Model: Lightweight Version(Manual Shut-down)
 Integrated Condenser
 With Oil-water Separator
 Power: 1800 W
 Speed: 2800r/Min
 Pressure: 0-30mpa
 Noise: 76db
 Displacement: 80l/Min
 Compressed Series:the Secondary Compression
 Suction Pressure:atmospheric Pressure
 Cooling Way:heat Sink Circulating Water Cooling
 Lubrication Way:splash Lubrication
 Security Settings:low Pressure/High Pressure Relief Valve
 Factory Blast Pressure:32mpa
 Safety: over Voltage Protection Safety Valve, Motor Overload Protection
 Suitable for: Small Container Within 1 L, Including 0.35l, 0.45l, 0.55l(Valves, Pipes and Small High Pressure Gas Cylinders)

Features:
 Copper Wire Motor, Long Service Life
 Optimization Design of Air Way, over Pressure Safety Valve, Radiator, Water Circulation, Integrated Condenser, Oil-water Separator, Motor Overload Protection
 All Metal Inner Core, Durable
 Optimized Design of Expansion Compensation Ring Airway, Fast Air Supply
 Built in Heat Sink Structure Water Cooling, Fast Heat Dissipation
 Anti Rust and Anti-corrosion Treatment of High Pressure Cylinder Head. No Potential Safety Hazard Due to Oxidation.
 High Pressure Cylinder Heat Radiation Protection. Reduce Overheating of High Pressure Cylinder Core, Resulting in Excessive Piston Wear
 Pressure Explosion-proof Valve. When the Pressure Reaches 32mpa, the Pressure Insurance Will Automatically Start.
 Reasonable Collocation, High Pressure Cylinder Circulating Water Cooling, Motor Forced Air Cooling System.
 The Product Is Strictly Controlled and Delivered After Testing. If the Machine Has Slight Oil Leakage, It Is a Normal Phenomenon. some Products Are Not Cleaned After Testing.
Packing List:
1 X Air Compressor
1 X Water Pump
1 X Water Tube
1 X High Pressure Gas Pipe
1 X Oil Water Separation
1 X Set Vulnerable Parts

Spezifikationen:

Modell: Leichte Version (Manuelle Abschaltung)
Integrierter Kondensator
Mit Öl-wasser-abscheider
Leistung: 1800 W
Geschwindigkeit: 2800r/Min
Druck: 0-30mpa
Geräusch: 76db
Verdrängung: 80l/Min
Komprimierte Serie: Die Sekundäre Komprimierung
Saugdruck:atmosphärischer Druck
Kühlweise: Kühlkörper Zirkulierende Wasserkühlung
Schmierweg: Spritzschmierung
Sicherheitseinstellungen: Niederdruck-/Hochdruckbegrenzungsventil
Strahldruck Ab Werk: 32mpa
Sicherheit: Überspannungsschutz Sicherheitsventil, Motorüberlastschutz
Geeignet Für: Kleine Behälter Bis 1 L, Einschließlich 0,35l, 0,45l, 0,55l(Ventile, Rohre Und Kleine Hochdruckgasflaschen)

Merkmale:
Kupferdrahtmotor, Lange Lebensdauer
Optimiertes Design Von Luftweg, Überdrucksicherheitsventil, Kühler, Wasserzirkulation, Integrierter Kondensator, Öl-wasser-abscheider, Motorüberlastungsschutz
Ganzmetall-innenkern, Langlebig
Optimiertes Design Des Dehnungsausgleichsring-atemwegs, Schnelle Luftzufuhr
Eingebaute Kühlkörperstruktur Wasserkühlung, Schnelle Wärmeableitung
Anti-rost- Und Anti-korrosions-behandlung Des Hochdruck-zylinderkopfes. Keine Potentielle Sicherheitsgefahr Durch Oxidation.
Hitzestrahlungsschutz Des Hochdruckzylinders. Reduzieren Sie Die Überhitzung Des Hochdruckzylinderkerns, Was Zu Übermäßigem Kolbenverschleiß Führt
Druckexplosionsgeschütztes Ventil. Wenn Der Druck 32 Mpa Erreicht, Startet Die Druckversicherung Automatisch.
Angemessene Zusammenstellung, Wasserkühlung Des Hochdruckzylinders, Zwangsluftkühlung Des Motors.
Das Produkt Wird Streng Kontrolliert Und Nach Dem Test Geliefert. Wenn Die Maschine Leichte Öllecks Aufweist, Ist Dies Ein Normales Phänomen. Einige Produkte Werden Nach Dem Testen Nicht Gereinigt.

Packliste:
1 X Luftkompressor
1 X Wasserpumpe
1 X Wasserschlauch
1 X Hochdruckgasrohr
1 X Öl-wasser-trennung
1 X Satz Anfällige Teile

️  ️If You Have Any Questions, Please Email Us and Our Customer Service Team Will Respond to You As Soon As Possible and Provide You with the Best Solution, Thank You Very Much.   ❤
Bitte beachten Sie: Dieses Produkt befindet sich in Deutschland, Kunden, die in Länder außerhalb Deutschlands versenden, müssen Zollgebühren an den Zoll zahlen, Kunden, die nichts dagegen haben, sind willkommen zu kaufen.

Please note that the product is located in Germany, and customers who transport it to countries outside of Germany need to pay customs fees to customs. Customers who do not mind are welcome to purchase.  
PushAuction


Am 09.04.2024 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques