Features:
-This
is an external combustion engine in which the fuel is burned
continuously, and the piston is moved by the expansion of air (or helium
or hydrogen) as a medium, and the expansion gas is cooled in the cold
chamber, and the cycle is repeated. Only a small alcohol lamp, you can
make it fast rotation and strong power.
-As
the external combustion engine to avoid the traditional internal
combustion engine of the explosion to do work, in order to achieve a
high efficiency, low noise, low pollution and low operating costs.
-The
biggest advantage of the external combustion engine output and
efficiency from the influence of altitude, very suitable for high
altitude areas.
-
Aerodynamics are rich in knowledge of physics, Engine principle is
intuitive, educational toys, teaching experimental equipment can
effectively cultivate children's interest in learning can also be used
for classroom teaching, more intuitive and easy to understand.
-A
floating bead 8 cylinders and its piston to drive based on the motor
power from hot air, hard to believe it is a engine model, super cool,8
cylinders, 8 heating tube
-8 fire-outlet sparks the flame to the stainless heating tube, cool
Specification:
Name :Hot Air Stirling Engine Model
Model:524378
Material: Stainless Steel; base:wood
Color:Silver
Sizes:21.5x10x16.5cm/8.46”x3.9”x6.49”
Type:16 Cylinder(8 heating tube+8 cooling tube)
Instructions:
-The
engine model on the horizontal position by hand toggle the flywheel to
see if smooth, if there is a strong sense of raw astringent, check the
connection rod is normal, whether the cylinder oil and dust, and if so,
please use toilet paper to erase Not smooth. Toggle the flywheel feel
pressure rebound within the cylinder body is a normal phenomenon, the
cylinder is sealed.
-The packing bag of alcohol lamp cotton wear into the metal cap lamp.
-Please
go to the pharmacy to buy 95% purity alcohol, anhydrous industrial
alcohol better. Fill the alcohol lamp to less than two-thirds.
-Alcohol
lamp to the alcohol lamp, at the premise of ensuring safety, ignite the
alcohol lamp about 2 minutes after the flywheel, until the flywheel
automatic operation so far, the whole process of heating, hands may not
touch.
-Led
lights can be directly into the generator output interface, if not
inserted, the exchange can be positive and negative, led a long foot for
the cathode.
Ignition steps:
First
press the button to the gas tank, and then dial the valve above,
ignition, waiting for about 30 seconds to heat, turn the propeller
start, the position of the gas tank has a knob to adjust the level of
the firepower, it can control the speed, in order to the service life of
model, generally do not recommend adjustment, small 2000 turn
enough.Finally turn off the valve, and turn off , be careful, be sure to
wait until the natural cooling before touching the heating cylinder, so
as not to be scalded.
Cycle process:
1.Isothermal heat absorption;
2. By the external heat source isothermal heating;
3.So on heat, for heat with;
4.To the coolant isothermal exothermic, complete a cycle.
Package Included:
1x Hot Air Stirling Engine Model
Note:
1.Due
to the different display and different light, the picture may not
reflect the actual color of the item. Thanks for your understanding.
2.Please allow little differs due to manual measurement.