BHC03 Historical Church BELL Tower Sections - For model Railways OO Gauge

BHC03 Historical Church BELL Tower Sections - For model Railways OO Gauge

Historical Church BELL Tower Sections casting mould


Produces heritage historical church bell tower sections that can be used on all you models or in conjunction with our BHC (British Historical Churches) range. or can be used with your other building projects as you like.

Please check our related products in the BHC range.

We  produce many more in BH range, that provides the highest level of detail, please check out all our other products in the BH (British Historical) Premium Range series, to see all the amazing buildings that can be made.

For best results we recommend casting in resin and we also recommend using DWR plastics online 

We also provide many building ideas and plans online, if you are looking for some inspiration and remember you can build many more models using the parts as they will be compatible and interchangeable. 

Main Sections

40mm Wide x 34mm Tall


Please note, this is an OO Scale mould.

  • Easy to cast
  • Easy to extract
  • Re-usable silicone mould
  • Realistic Scenery and buildings
  • Cast with Plaster or resin
  • Easy to clean and store

Product Use

Please ensure you wash and dry your casting mould before use, to remove any packing residue. Our casting moulds are made of the highest quality silicone and are suitable for resin casting 

Cast these moulds with Fastcast or slow cast resin to make custom casts that can be used to make model buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.

Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. If using resin mix equal parts of the resin liquid, stir and pour.

Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue if casting in plaster or superglue if using resin casted parts.

You can make a range of buildings, we suggest you lay out all the parts before gluing so you can see how your new building will look. We also have FREE building plans as well as tutorials online to help you get the most out of this amazing building medium.

Casting is simple, use any casting plaster or resins with our moulds and extract your parts, can be used over and over so you can create a lot of scenery parts very cheap and effective. If you also spray your moulds with a little water before use you will obtain better castings.

Have you seen our resin cast video https://youtu.be/7P6fyBeYJKQ

Our new Plaster Casting Video https://youtu.be/cyTh-oMHwTY

We recommend Tuffcast plaster, just mix with water in a plastic cup, pour into the mould, flatten off with a spatula and within 30 minutes you will have nice flat castings that are made of real stone and very easy to glue (Using PVA woodwork adhesive), paint and weather.

If you are casting in resin, the parts can be glued using superglue.

Moulds should be washed after use with warm soapy water and always stored flat to maintain the products life.

We have casting videos on scalecast.co.uk

You can also find our videos on YouTube, just search for scalecast and you will find us.

Please note:- We ship orders on Tuesdays and Thursdays each week