BeoVision 10-32 LCD Television
Largueur x Hauteur x Profondeur : 81.4 x 74.2 x 6.4 cm
Poids : 27 kg
Noir, Argent, et Blanc
Mains voltage range : 100-264 V AC, 47-63 Hz
Power consumption : On mode 115 W, Standby with system module enabled 0.7 W, Standby with system module disabled 0.5 W
Télécommande Beo4
Diagonal picture size : 32" 16:9 TFT LCD
Aspect ratio : 16:9
Contrast ratio Typical 5000:1
Pixel Count : 2.1 million
Resolution : 1920 x 1080 pixels (Full HD)
Display colours : 16.7 million
Peak luminance ratio : 65%
Luminance of white : Typical 450 cd/m2
Response time : Typical 6 msec.
Backlight : Edge-type LED backlight, Global backlight dimming
Refresh rate : 100Hz/120Hz
Formats
Format 1: 16:9 Panorama - 15:9
Panorama - 4:3
Format 2: Letterbox + Soft scroll
Format 3: 16:9
Automatic format optimisation via "Black Bar Detection"
16:9 detection on all Scart connectors
Support of WSS (Wide Screen Signalling) from broadcaster
Format 4: The bars can be removed and the picture is shown in a 16:9 format
Viewing comfort : Typical +/-89 degrees both vertically and horizontally
VisionClear : Yes
Langues : English, Danish, Dutch, Spanish, Italian, German, French, Swedish
Teletext level 1.5, 2000 pages
Teletext and picture, 9 memory pages, WSS
Tuning on analogue signals : 48-862 MHz
99 programmes, auto-tune, programme move and automatic naming
TV system on analogue signals
According to type and setup
B/G/L/L’/D/K, PAL and SECAM
Frequency range
45-860 MHz VHF, S-band, Hyper-band, UHF 99 programmes, auto tune, programme move and automatic naming
Stereo decoding capabilities on analogue signals
A2 + Nicam
Video format : Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)
Audio format : Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix
Frequency, range and IF bandwidth : 110-862 MHz (Band 3, 4, 5) IF bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230 MHz and 470-858 MHz
Common interface and smart card slots
Common Interface according to EN50221
1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 Smart card slot connector
All CA systems available as common interface are supported
CA power supply: 5 V/500 mA max.
Digital tuner DVB-T/C/S2
Video format : Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)
Audio format : Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix
Frequency, range and IF bandwidth
S/S2: 10700-12750 MHz, IF Bandwidth 950-2150 MHz
T/C: 110-862 MHz (Band 3, 4, 5) IF Bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230MHz and 470-858MHz
Raster
Special requirements for France, Italy, Taiwan and Australia
Cofdm (coded orthogonal freq. division modulation) spectrum
2K & 8K, hierarchical and non-hierarchical
Modulation
Terrestrial : QPSK, 16QAM, 64QAM
Satellite : QPSK
Satellite S2 : 8PSK, QPSK
Code rate
1/2, 2/3, 3/4, 5/6, 7/8
Guard interval
1/32, 1/16, 1/8, ¼
Symbol rate
2-45 Msymb/sec
Odu control
DiSEqC 1.1
Common interface and smart card slots
Common Interface according to EN50221
1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 SmartCard slot connector
All CA systems available as common interface are supported
CA power supply: 5V /500 mA max.
Loudspeakers : Integrated stereo speakers
Power amplifier modules : 20 W
Frequency range : 85-20,000 Hz
Cabinet principle/ net volume : Closed box 0.5l
Midrange : 58 mm
Tweeter : 19 mm
Bass equalizer
Adaptive Bass Linearization (ABL)
Video distribution
BeoLink video distribution (system modulator output to link room) via RF
Frequency range
According to setup: G or I or M RF output
- Video frequency range: 471.71-855.25 MHz (in 1 MHz steps) dual side band
- Audio frequency range:
- System G: 5.5 MHz (system can be set in Service Menu)
- System I: 6 MHz (system can be set in Service Menu)
- System M: 4.5 MHz (system can be set in Service Menu)
Audio : Stereo audio distribution via Master Link
Peripheral Unit/Set-top Box Controller:
Controlling boxes with Beo4
Maximum control of 4 boxes
HDMI Inputs : 3 X HDMI
Formats : 480p,576p, 600p, 768p, 576i, 480i, 720p, 1080p,1080i