Godox X2T-F 2.4G wireless transmitter for Fuji Cameras (TTL Autoflash) and flash( also for the cameras that have PC sync socket)
This wireless flash trigger transmitter model X2T-F can be used for studio flash, speedlite and camera shutter. It applies to Fuji hot-shoe mounted DSLR or Mirrorless series cameras. With this X2T-F wireless flash trigger, high speed synchronization is available for most camera flashes which support TTL. The max synchronization speed can reach to 1/8000s.
Compatible Camera Models (FUJIFILM cameras are divided into three kinds according to their controlling ways to camera flash):
Please Note: X100T do not have second-curtain sync (REAR) function. The AF-assist beam will light up when the shutter is at low speed(<200).
A: GFX50R, GFX50S, X-Pro2, X-T20, X-T3, X-T2, X-T1; [Support TTL(Standard/REAR/HSS(FP)); Support M(Standard/REAR/HSS(FP)); Support Multi Flash; Support AF-assist Beam]
B: X-Pro1, X-T10, X-E1, X-A3; [Support TTL(Standard); Support M(Standard); Multi Flash; Does NOT Support AF-assist Beam]
C: X100F, X100T; [Support TTL(Standard/REAR); Support M(Standard/REAR); Multi Flash; Does NOT Support AF-assist Beam]
Features:
- With built-in 2.4GHz wireless transmission and 100m workable distance.
- Wireless grouping system and 32 channels to have multiple flashes under control simultaneously.
- The max synchronization speed can reach to 1/8000s.
- Compatible with Fuji DSLR or Mirrorless cameras with hotshoe (TTL autoflash).
Specification:
- Compatible cameras: Fuji Camera
- Manual Mode: Yes
- Multiflash Mode:Yes
- High-Speed Sync: Yes
- Rear-Curtain Sync:Yes
- Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
- Flash Exposure Lock: Yes
- Focus Assist: Yes
- Modeling Lamp: Yes
- Beeper: Yes
- Transmission Range(Approx.): 0-100m
- Modulation Mode: MSK
- Channels: 32
- Wireless ID: 01-99
- Groups: 5
- Display: A large LCD panel, backlight ON or OFF
|
|
|
|---|---|---|
Controlled by Cell PhoneYou can control the trigger by downloading "GodoxPhoto" APP. After downloading the APP, you can connect the trigger and cell phone by bluetooth. | Support TTL FunctionSupport TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, control of the modeling lamp, adjusting all groups' output value simultaneously, ect. | New AF Assist LightThe X2-F has a new AF assist light that uses visible light instead of a red/infrared pattern. So, a certain brand of camera should find it a little easier to use autofocus in the dark now. |
|
|
|
|---|---|---|
Quick Lock Hot-ShoeGodox X2T-F has the new hotshoe locking mechanism as like as the Godox V1, which automatically locks, and a button to quickly unlock and twist it open to remove it. | Relocated Bottom Control-WheelThe dial is positioned in the bottom of the left-hand corner so as not to obstruct the LCD panel of the camera, which should allow easier spinning. | Type-C ConnectionThe MicroUSB has been upgraded to a Type-C. Type-C sockets are just much more solid than microUSB, as are the cables. They’re less prone to being damaged or bent. And you can now upgrade the firmware ether in Windows or Mac system |
|
|
|
|---|---|---|
Effectively Avoid Signal InterferenceWith 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same | 1/256 Minimum Power OutputThe minimum power output can be precisely set to 1/256 in 1/10 step adjustment. | Package Including1 x Godox X2T-F 1 x EACHSHOT Color Filters 1 x EACHSHOT Cleaning Cloth 1 x Manual |
New Upgraded functions:
1. User-friendly design, and easy to operate
LCD with clear display effect; With 5 group setting buttons, and 3 function buttons to realize quick setting
2. Bluetooth Suppot
Using your iPhone/Android-based cell phone, or iPad/Android-based tablets to connect the X2 via Bluetooth after downloading the "GodoxPhoto" APP, you can control the flash mode, power output, the modeling light mode, the beep of Godox flashes, and etc.
3. Quick lock Hotshoe
4. The minimum power output can be precisely set to 1/256 in 1/10 step adjustment
All the groups and function buttons feature backlighting, easy to be operated even in low light environment
Functions:
- Supporting TTL autoflash and professional functions
- Compatiblity: X2T-C for Canon cameras; X2T-N for Nikon Cameras; X2T-S for Sony cameras; X2T-F for Fujifilm cameras; X2T-O for Olympus and Panasonic cameras and X2T-P for Pentax Cameras.
- With 5 Groups, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems.(Reminder: Only when the wireless ID and channel of master flash slave flash are same, can they be trigged.)
- Fully support TTL autoflash, 1/8000s high-speed sync, multiflash mode, manual mode, flash exposure compensatin, adjusting the lighting parameter through the mobile APP, scan setting, one-shot and multi-shot setting, control of modeling lamp, adjusting all groups' output value simultaneously, etc.
- The newly added scan setting function can help sutomatically detect the channel with least interference.
- Support firmware upgrade via Type C USB cable, wirelessly triggering by 3.5mm sync cord jack
