Feature:
*MY6818 Portable Wire Finder consists of transmitter, receiver and accessories. The working principle is that the transmitter sends a weak AC voltage to the detection cable and generates an electric field, and then the detector is close to the electric field to generate an induced voltage, and then the detection signal is sent to the LCD screen for display processing after digital processing, quickly helping you detect the position and fault of the cable.
*MY6818 wire finder is made of high-quality ABS material, which is sturdy and . At the same time, the man-machine interface is friendly, the buttons are easy to operate, the liquid crystal display effect is intuitive, it has a buzzer alarm, and is equipped with an LED flashlight, which is very suitable for cable construction and construction pipelines. Construction and maintenance of communication cables, power supply lines, and electric heating lines.
*Underground wire locator supports detection of cables, wires, metal water supply, gas supply pipes, electric heating routes and short circuit and open circuit fault locations buried in walls or underground. Locate fuses and warranty circuits, as well as covered outlets and junction boxes
*The road patrol transmitter has the function of AC and DC voltmeter, which can linearly measure 12-400V AC and DC voltage, and supports setting the transmission power and transmission codes; the pipeline positioning receiver can choose automatic and manual modes, supports Uac mode, and has automatic frequency sweep, Screen backlight, silent mode, automatic shutdown and other functions.
*Using MY6818 cable detector can help you save cost. When encountering a cable problem, you don't need to hire a professional to diagnose the fault location for you, saving diagnosis costs, and you don't need to dig the entire cable path to find the fault location, saving labor and not damaging the wall or ground.
Specification:
Transmitter
Output signal: 125kHz
External voltage identification range: DC 12~400V ±2.5%; AC 12~400V (50~60Hz) ±2.5%
Display: LCD, with function display and column chart
External voltage's dielectric strength: Max. 400V AC/DC
Overvoltage type: CAT III 300V
pollution degree: 2
Power supply: 1×9V, IEC 6LR61(Not included)
MIN current: About 31mA
MAX current: About 115mA
Fuse: F 0.5A 500V, 6.3×32mm
Temperature（In work）：0°C to 40°C, with maximum relative humidity of 80% (non-condensation)
Temeperature（In storage）：-20°Cto 60°C, with maximum relative humidity of 80% (non-condensation)
Altitude: Max. 2000ml
Dimensions (HxWxD): 190mm×89mm×42.5mm
Weight: About 360g (Without battery)
Receiver
Depth of tracking: The depth of tracking depends on the material and specific applications
Single pole application: About 0-2m
Dual-pole application: About 0-0.5m
Single loop line: Up to 2.5m
Grid voltage identification: About 0-0.4m
Display: LCD, with function display and column chart
Power supply: 6x1.5V AAA, IEC Lr03 (Not included)
MIN current: About 32 mA
MAX current: About 89 mA
Altitude: Max. 2000m
Dimensions (HxWxD): 241.5mm×78mm×38.5mm
Weight: About 280g (Without battery)
Packing list:
1*Transmitter
1*receiver
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
