• Matrice modulare Aten VM1600 16x16 così configurata:

8 Input (4 HD-SDI + 4 HDMI)

12 Output(4 HDMI + 8 HDBaseT)

Alimentatore ridondante

Ottime condizioni, pari al nuovo.

• Features:
• Connects any of 16 video sources to any of 16 displays in combination with ATEN Modular Matrix I/O Boards
• Multiple means for system configuration including front-panel pushbuttons, RS-232/422/485 control, and Ethernet connections for web GUI or Telnet
• 4K resolutions – up to UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0)*
• Seamless Switch™ – features close-to-zero second switching for continuous video streams, real-time switching, and stable signal transmissions*
• Scaler – features a (4K) video scaling function to convert input resolutions to the display’s native resolutions*
• Video wall – allows you to create custom video wall layouts via intuitive web GUI*
• EDID Expert – selects optimum EDID settings for smooth power-up, high-quality display, and use of the best resolutions across different screens
• Audio-enabled – HDMI audio can be extracted and stereo audio can be embedded*
• Bi-directional RS-232 channel – allows you to control the connected serial devices simultaneously through the web GUI
• Supports redundant power module for higher reliability
• Hot-swappable design for easy integration of I/O boards, fan module, and power supplies
• HDCP 2.2 Compatible*
• HDMI: 3D, Deep Color, 4K*
• Consumer Electronics Control (CEC) supported*
• ESD protection for HDMI
• Rack mountable (6U design)
  * Note:
  1. The availability of the features with “*” depends on which I/O board is inserted.
  2. When Seamless Switch™ is enabled, 3D, Deep Color, or interlace (i.e., 1080i) formats will not be supported. To use these formats, make sure to disable Seamless Switch™.
  3. Videos may not display within range when Seamless Switch™ or Video Wall is enabled, in which case please adjust the display settings on your device.
• 
  

• Specifications:

Video Input
Interfaces	Depends on which I/O board is inserted
Impedance	100 Ω
Max. Data Rate	10.2 Gbps (3.4 Gbps per lane)
Max. Pixel Clock	340 MHz
Compliance	HDMI (3D, Deep Color, 4K) HDCP Support depends on the boards selected Consumer Electronics Control (CEC) HDBaseT Compatible
Audio
Input	Depends on which Input board is inserted
Output	Depends on which Output board is inserted
Control
RS-232	Connector: 1 x DB-9 Female (Black) Serial Control Pin Configurations: Pin2 = Tx, Pin 3=Rx, Pin 5= Gnd Baud Rate and Protocol: Baud Rate:19200, Data Bits:8, Stop Bits:1, Parity: No, Flow Control: No
RS-485/RS-422	Connector: 1 x Captive Screw Connector, 5 Pole
Ethernet	Connector: 1 x RJ-45 Female
EDID Settings	EDID Mode: Default / Port1 / Remix / Customized (EDID Wizard support)
Connectors
Power	1 x 3-Prong AC Socket
Power
Maximum Input Power Rating	100-240 VAC; 50-60Hz; 1.0A
Power Consumption	378W (Max.) *A power module can be purchased for power redundancy.
Fan	Airflow: 60 cfm Operating Voltage: 10.8 - 13.8 VDC Operating Temp: -10 - 70°C
Environmental
Operating Temperature	0 - 40°C
Storage Temperature	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	17.00 kg ( 37.44 lb )
Dimensions (L x W x H)	48.22 x 39.90 x 26.59 cm (18.98 x 15.71 x 10.47 in.)
Rack Height (U Spaces)	6U
Carton Lot	1 pc
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.