Vintage 70's Cinelli/3TTT/Shimano/Mafac cyclocross/gravel groupset/build Kit

Pedals: Lyotard 79 / 9/16" x 20 (English)

There are traces of use,scuff  and patina .The bearings are dry.Not lubricated.

Toe clips: Lapize size m

There are traces of use, rust and bent.

Straps: Christophe 

The leather is dried out and feels hard, small cracks are noticeable.

Traces of use, clamp marks, scuff, dirt traces and patina  .

Bottlecage:  Specialites T.A. bottle cage

There are traces of use, rust and bent.

Pump: Silca bike framefit pump

There are traces of use, patina rust and dried out rubbers.

The pump still builds up pressure, but obviously no longer has the same value as when purchased due to age.

Rear Derraileur  : Shimano 600EX Arabesque

There are traces of use, scuff, chain marks, and patina rust. 

Headset:  Shimano Dura-Ace First Gen./ ISO 25.4mmx24TPI

There are assembly and disassembly traces, bearing/use traces, grease and patina rust traces. 

Shifter cable stops :  Shimano

A clamp on cable dual stop for allowing the use bar end shifters, when a frame is designed without bosses for braze on stops. 

There are assembly and disassembly traces and patina rust traces. 

Traces of use, clamp marks, scuff, glue traces ,cable rub and patina  .

Stem: Cinelli 1A (Cinelli Milano logo) 26.4/110 mm

There are assembly and disassembly traces,clamp marks, use traces, Heavy cable rub,scuff and patina rust traces.

The Stem is drilled to allow the brake cable to pass through. Was frequently done on cyclocross bicycles.

Saddle:  Cinelli Unicanitor black/dark brown

Traces of use, clamp marks, scuff, glue traces and patina rust  .

Seatpost: Sakae Laprade 27 mm

There are assembly and disassembly traces, use traces and patina rust traces.

The Steatpost is drilled to allow the brake cable to pass through. Was frequently done on cyclocross bicycles.

Parts are in used condition.Take a close look at the pictures for the state of the parts, please use zoom for more detail.Fast swipe, not lubricated, not polished.