Feature: 1. High Electromagnetic Frequency: The electromagnetic frequency of the generator is 150MHz, which can light up high efficiency bulbs without power.2. ABS Housing: The pulse generator's ABS housing has excellent flame retardancy and insulation, so you don't have to worry about safety. 3. Easy Charging: 3 holes are charged separately, and each hole takes about 30 minutes to . When the charger's indicator goes off, it means it is fully charged. 4. Convenient Operation: When the instrument is close to the light emitting tube part of the lamp, the lamp will light up, indicating that the instrument is of good and can perform relevant tests. 5. Wide Use: High frequency strong magnetic generator can be used in electronic factories, laboratories, electronic research and development and other factories to test electronic motherboard experiments for anti interference testing. Specification: Item Type: Electromagnetic Pulse Generator Package List: 1 x Pulse Generator 1 x Power Adapter 1 x Probe 1 x Heat Sink 1 x Chip 1 x Screwdriver Note: Attention To The Use Of Time: Each use should not exceed 10 seconds. Use 3 times in a row. Use 20‑30 seconds to cool the instrument. Prevent burnout due to high temperature. |