| Dédié à: |
Pour plus de détails sur les spécifications du véhicule, voir le tableau correspondant ci-dessous.
|
| Contains: |
4 ressorts pour les essieux avant et arrière.
Les images du produit présentées sont uniquement à titre d'illustration et peuvent ne pas être une représentation exacte du produit.
|
| Charge maximale à l'avant: |
900 kg
|
| Charge maximale arrière: |
900 kg
|
| Poids: |
Environ 10.3 kg
|
| Référence: |
E10-47-006-01-22
|
Slide the table for more details
| Vesta (GFL_) |
1.6 |
à partir de 11.2018 |
Petrol 75/102 |
30 mm |
30 mm |
| 1.6 |
à partir de 11.2015 |
Petrol 78/106 |
30 mm |
30 mm |
| 1.8 |
à partir de 06.2016 |
Petrol 90/122 |
30 mm |
30 mm |
- Without levelling control.
- Except vehicles with 4WD.
|
- If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
- If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover)
- The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \K\ in your vehicle registration certificate or to find at the type plate of your car!)
- Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de
- In case of non-conformance the items must not be fitted - please refer to your dealer.
- Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available.
- Mounting position - you can \read\ the mounting position of the springs from the imprint - have them installed just the way you read the imprint.
- Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required.
- Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs.
- This already can be necessary from 40.000 kilometers OE-damper-milage.
- The installation of Sport-Shock Absobers is recommended. As example Bilstein B8
- Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.
- Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given.
- The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
- The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.
- The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
- If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
|
Le Eibach Pro-Kit est la solution idéale pour les véhicules de rue les plus populaires. Notre légendaire systčme de ressorts améliore considérablement soit la performance que l’aspect du véhicule.
Le Pro-Kit abaisse le centre de gravité de votre voiture, ce qui réduit l'affaissement de la partie arričre lors de l’accélération, le roulis dans les virages et le mouvement en avant excessif au freinage. Aprčs l'avoir installé ŕ des roues et des pneus Plus-1 ou Plus-2, le Eibach Pro-Kit devient la touche finale d'une recette gagnante en termes de performance. Le Pro-Kit prévient également tout dégagement excessif de l'aile, rendant votre voiture aussi belle que performante.
Chaque Eibach Pro-Kit est conçu et testé par nos ingénieurs et nos experts en matičre de suspension et performance, pour garantir une allure spectaculaire et agressive et une tenue de route de haute performance, sans jamais compromettre ni la sécurité ni la qualité de la conduite. Grâce ŕ notre exclusive technologie de ressorts, Pro-Kit offre le meilleur équilibre pour que votre passion pour les voitures prenne une toute autre dimension.
C'est un produit tout neuf, original et tout ŕ fait utile.
