https://amzn.to/3JAVmF6

Feature Bullets
  • Convert 2x M.2 NGFF SATA based SSD to a standard internal 2.5" 7mm SATA drive. It supports H/W RAID 1, SPAN (Big Drive) and PM (2Drives) Modes. Note: SATA Host is required to be Port Multiplier capable for PM Mode.
  • Supports 6Gbps, 3Gbps SATA based M.2 NGFF 80/60/42/30 mm SSD
  • Open frame aluminum housing dessign providing excellent heat dissipation for M.2 SATA SSD
  • No driver installation required. Native support in Windows, Mac and Linux.
  • CE, FCC, and Fully RoHS compliant. High quality product. Made in Taiwan.

Product Description
The Ableconn ISAT-M2SR turns two M.2 SATA SSD modules into an 2.5-inch SATA III SSD drive with RAID to increase performance and redundancy. The drive metal frame and mounting holes enable you to install it like a 2.5" internal hard drive. It supports SATA based M.2 NGFF 80/60/42/30 mm SSD.

Specification

  • Connector:
    • 1 x SATA Data & Power (7+15 pins) Receptale
    • 2 x M.2 NGFF slots (type 2280-D5-B connector on board)

  • Chipset: ASMedia ASM1092R
  • Data transfer rate:
    • Up to 6 GBps (SATA III)
  • Jumper Selection:
    • 1 x jumper for RAID Mode setting
  • Software:
    • OS independent; No driver installation is required on Windows, Mac, and Linux.
    • Provides Windows and Mac GUI to configure RAID modes and monitor RAID status.

  • Convert 2x M.2 NGFF SATA based SSD to a standard 2.5" 7mm SATA drive
  • Supports SATA I, SATA II, SATA III Host port.
  • Supports 6Gbps, 3Gbps SATA based M.2 NGFF 80/60/42/30 mm SSD
  • Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD
  • Supports dual-sided SSD module 1.5mm component height on the top and bottom side
  • Supports H/W RAID 0, RAID 1, SPAN (Big Drive) and PM (2Drives) Modes. Note: the SATA Host required to be Port Multiplier capable for PM Mode. The SMART function is not supported.
  • Hardware Jumper and Windows & Mac software GUI configure RAID modes
  • 2x LED indicators for M.2 accessing activity or device failure
  • Includes 7mm height 2.5-inch drive metal frame with 8 mounting holes and 4 HDD screws
  • Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm
  • Fully RoHS compliant.
  • Made in Taiwan

Package Contents

  • Ableconn ISAT-M2SR 2.5-inch SATA Adapter for Dual M.2 SATA SSD with RAID
  • 4x drive mounting screws

Ships fast and free!