150W Brushless Suction Turbine Fan Motor 17-26V Built-in Drive Brushless Fan Motor Support 1KHZ PWM Signal Speed Regulation
Specifications:
150W high-power brushless dust suction turbine fan, this is with a shell, there are air inlet and outlet design, built-in high-power belt drive brushless fan, rated voltage 22.2V, maximum power 150W, support 1KHZ pwm signal speed regulation, the actual test voltage of the fan 17-26V can operate normally.
The fan belongs to both dry and wet, the fan duct and the internal motor drive can be completely isolated, pay attention to a small hole in the middle of the back cover is to heat the internal motor motherboard and motor, pay attention not to enter the liquid, although this suction fan can absorb water and dust, but the vacuum cleaner in front of the suction port should be added filter, not suitable for particles and foreign bodies directly through the impeller fan, Water absorption is not directly absorb 100% water medium, otherwise the impeller resistance is too large motor protection, generally air and water mixture through.
Fan built-in drive, signal line blue, green and black together short-circuited is the most high-speed operation, need to speed as long as the black thin line input 1KHZ pwm signal can be speed adjusted, signal negative connected to the blue, green line is connected to the blue is to control the start and run, the red thick line is positive, black thick line is negative.
The power supply must use a high-current power supply, preferably more than 10A, and the battery needs a power-type lithium battery.
The fan belt enclosure weighs about 430 grams.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1mm-1cm differences due to manual measurement.
Package Included:
1x Fan Motor