Package 1 Included:
Only 1 Transmitter * 1pcs
Package 2 Included:
Only 1 Receiver module *1pcs (include Shell );
Package 3 Included:
1 * Receiver module ( include Shell ),
1 * Remote Control (include battery ).
Package 4 Included:
2 * Receiver module ( include Shell ),
1 * Remote Control (include battery ).
Free Gift: Cross screwdriver * 1pcs.
Attention Please: Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
Technical Data Of Receiver: Input Power:DC10V-14V Standby Current:<5MA RF Frequency:315M or 433M RF working mode:superheterodyne Receive sensitivity: >97dbm Transmitting distance:>100m ( open space) Decoding mode:MCU software decoding Remote storage:25pcs Support remote type: Learning code, Fixed code(Rolling code can be design) Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s ) Wiring type:fixed terminal Output Terminal :NO , NC , COM Dimension of PCB:35*30*18mm (L,W,H) Wiring diagram 1: +V : 12V + input ; - V: 12V - input ; NO: Output , normal open; COM:Output , common ; NC: Output , normal close. |
|
Specifications Of The Remote Control: Operating frequency: 433.92MHz Power by 27A 12V Battery (Battery included ), Material: PVC. Button: 2 buttons; Size: 63mm x 33mm x 13mm; Operating voltage: DC 12V ; Operating Current: 12mA; Transmitting power: 10mw; Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 80m |
|
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Keeping press the Learning Button on the receiver until the LED indicator ON and then flash,until it flash for 8 times. it mean the code have been cleared successfully;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time,
the LED will be on , it comes into momentary setting learning state mode.
Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off.
It means learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , the LED will be on , it comes into toggle setting learning state mode.
Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off.
It means learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
