Feature:

1. PROFESSIONAL DESIGN: Submersible water pump designed for fish tanks, aquariums and fountains, 12V low voltage for greater safety; brushless DC motor, good insulation for a spark free working safety in different situations.
2. EASY TO USE: Submersible water pumps have a larger grip on the main body to prevent the pump from falling due to slippery conditions; the main body is tool free and easy to clean and maintain.
3. PRACTICAL: The fountain pump is made with a ceramic shaft and silicone sleeve for greater wear resistance and longer life. It can be used with both fresh and sea water. The water inlet and outlet are multi diameter spouts, solving the problem of free replacement of original parts.
4. STABLE PERFORMANCE: The fountain pump is compact and portable for travel. Running at a very quiet level, the internal motor is noiseless and provides consistent performance over time. Provides a quiet environment even in the bedroom.
5. EASY INSTALLATION: The 4 strong suction cups on the bottom of the mini brushless water pump help to hold it in place, so you can attach it vertically or horizontally to the right side of your aquarium.
6. WIDE APPLICATION: The aquarium submersible pump is designed for fresh and salt water and can be used in small to medium sized aquariums, fish tanks, backyard fountains, waterfalls and more. It can also be used for rockeries, spouts, garden statues and irrigation systems.

Specification:

Item Type: Aquarium Submersible Pump
Material: ABS Engineering Plastic
Parameters: AU Plug, Rated Voltage: 100-240V, Rated Output Voltage 12V, Rated Power: 20W
Lift:5m
Flow Rate: 1100L/H

Package List :

1 x Aquarium Submersible Pump
1 x Plug
2 x Water Outlet
4 x Suction Cup
2 x Washer

1 x 12V 2A Power Adapter 

Note:
1. To ensure the performance of the product, it is forbidden to idle the pump without water for a long time;
2. Pay attention to the water proofing of the power cable connector where it is hung or placed, and isolate it from splashing water;
3. When installing or dismantling and cleaning the pump, the power supply must be cut off to ensure safety before proceeding.
4. This pump is only suitable for use in water above 0°C and below 35°C, otherwise it will cause damage to the pump.
5. Do not use the pump if the power cable is found to be damaged and do not replace it yourself.
Warning: Failure to follow the instructions below may result in injury to safety or to the pet, or damage to the machine.

How to use:
1. The power and performance of this product may vary with the difference in voltage, such as long term operation under high voltage, it will lead to product heating and burn.
2. When using the pump outdoors, the pump power socket must be installed with a reliable leakage power protection device, and the leakage power must not be greater than 30mA (leakage protection device is provided by the user or purchased).
(Leakage protection devices are provided or purchased by the user).
3. It is forbidden to run the pump on flammable liquids, strong acids and strong alkalis.
4. This product is suitable for operation in clear water, do not use in turbid water.
5. The maximum diving depth should not exceed 2m/6.6ft.
6. This product is not suitable for use by the following people: including children, inexperienced and uneducated people.
Unless operated under the supervision of an adult who can ensure their safety.
Maintenance.
1. Clean the submersible pump regularly to ensure its effective performance.
2. Keep the adapter dry, water washing is strictly forbidden. If there is dirt, first disconnect the power and then wipe it with a wet towel and dry it before energising.
3. If the pump is not used for a long time, lift the pump out of the water, preferably run it in water for a few moments, then dismantle the impeller chamber, take out the rotor assembly and rinse it in water, wipe and dry it and put it in a dry place.