Product Description:
1. Battery capacity: 2600mah
2. Water tank capacity: 600ml
3. Sewage tank capacity: 500ml
4. Usage time: 25 minutes in low gear (standard mode) and 20 minutes in high gear (strong mode) when fully charged
5. Charging time: 3-4 hours
6. Brushless motor has strong suction, single edge sticking, a return water rate greater than 90% (for example, 450ML of sewage comes in when 500ML of clean water goes out), and roller brush blockage protection
7. Self cleaning mode: After use, please promptly return the machine to the bottom plate. Long press the power button for 3 seconds to activate the self-cleaning function. After completion, ensure timely cleaning of dirty water tanks to avoid any odor. Before using the self-cleaning function, please check if there is enough water in the water tank.
8. Product packaging weight: 6.8KG
9. Product packaging size: 85 * 26 * 29cm
Before entrusting the repair department with the repair, please check the following points | ||
Issue | Possible Cause | Action Required |
Product not working | Roller brush entangled with hair or foreign objects | Clean the roller brush |
Dirty water tank full | Clean the dirty water tank | |
Clean water tank empty | Add water | |
Low battery power | Charge the battery | |
Reduced suction power | Roller brush, roller brush cover, or dirty water tank not properly installed | Reinstall |
Roller brush entangled with hair or foreign objects | Clean the roller brush | |
Brush inlet or pipes blocked | Clear the obstructions in the inlet or pipes | |
Sponge filter above the float dirty | Clean the sponge filter before using again | |
Dirty water tank filter clogged or not installed | Clean or install the sponge filter before using again | |
Unusual noises | Inlet is obstructed | Clear the obstructions in the inlet |
Dirty water tank filled with wastewater | Empty the dirty water tank before use | |
Roller brush not spraying water | Clean water tank empty | Add water |
Clean water tank not installed properly | Reinstall properly | |
Roller brush not rotating | Roller brush entangled with hair or foreign objects | Clean the roller brush |
Air outlet leaking water | Float not installed | Install the float |
Pre-filter not dried after cleaning | Dry the pre-filter before using it again | |
Water leaking from the bottom of the roller brush | Dirty water tank or dirty water tank sponge filter not installed | Install the dirty water tank and sponge filter |
Unable to charge the battery | The machine is not fully inserted into the charging base | Check if the machine is placed correctly |
The power adapter is not properly connected to the power outlet or the charging base port | Ensure that the power adapter is properly connected to the power outlet and the charging base port | |
Sudden battery level drop during discharge | Battery pack malfunction | Perform three or more complete charge-discharge cycles on the product. |
Reduced runtime | Battery aging | Contact the purchase store or after-sales service for replacement. |
High or low ambient temperature | Operate in a suitable environment. | |
Battery not fully charged | Make sure the battery pack is completely charged before use. |