Application 1. Keep the back clean before ironing and adjust the temperature to a temperature suitable for the type of material. 2. To prevent scalding, place a layer of thin cotton cloth on top of the patch before ironing. (If your patch has sequins/bright surface please see Instruction 4.)) 3. Place the patch in the desired position (don't tear off the glue) and press it back and forth for a few times. (usually about 10 seconds) 4. If your patch has sequins or a bright surface, wet the cotton cloth to avoid melting. Press quickly and check the patch after each second to avoid melting/burning. 5. SUGGESTION: In order to make the patch more permanent, after ironing, use a needle and thread to sew a few stiches on the side of the patch to make it stronger. |