Product details
T-Bar Car Body Panel Paintless Dent Removal Repair Lifter Tool+18Pcs Puller Tabs
New Comfort alloy grip T-Handle silde hammer Glue Puller with 18Pcs Puller Tabs
Easy to controll,suitable for any person to operate,repair the dent for yourself directly
Works great on smaller door dings & hail damage; Big dent needs slide hammer or puller.
Small dent needs mini dent lifter or pulling bridge.
Use different size glue tabs to different dent.
Please pay attention: the item only a mini lifter and 18pcs puller tabs, does not include the glue and glue gun.
How to use this paintless dent repair kits:

1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package Includes:
1 x T-Bar
18 x Glue Pads
1 x Mini Suction Cup