Welcome to the Patkor store auction

In this auction we offer:

1 Pcs, Brand New

Reusable gel joint 1x1.5-25mm2 / 4x1.5-2.5mm2 100x59x34mm IP68 BREAK30 MB /T2UK

Parameters:

• Nominal conductor cross-section from/to [mm2] to: 50
• Nominal conductor cross-section from/to [mm2] from: 1.5
• Number of wires: 5
• For connecting paper-insulated wires to plastic-insulated wires: No
• Coaxial: No
• With screw connections: No
• Approved for the mining sector: No
• Voltage range: 0.6/1kV
• Suitable for: Other
• Model: Gel
• Halogen free: No

The fastest way to connect cables working in the ground or under water! For underground or underwater installation For repeated connections Resistant to water, UV radiation and chemicals Guarantees a durable and tight connection The BREAK 30 gel joint is the right solution for series connections made in voltage installations up to 1kV. The joint is used to connect single- and multi-pole external cables with cross-sections up to 4x2.5 mm². It can be used for both single-core (wire) and multi-core (cord) cables. Phase insulation is a special separator included in the set. The degree of protection IP68 provides protection against the effects of continuous immersion in water, and therefore gives the possibility of burying the connection in the ground or leaving it in places with high humidity. Specification: Manufacturer: MOREK Model: Break 30 Product symbol: MBG0030A24 Protection degree: IP68 Cable type: wire, stranded Construction: pass-through Max voltage: 0.6/1 kV Operating temperature: -20 °C ÷ 90 °C Dimensions: 100 x 59 x 34 mm Wire section range: Single-core 1x 1.5÷50 mm² Double-core: 2x 1.5÷10 mm² Three-core: 3x 1.5÷4 mm² Four-core: 4x 1.5÷2.5 mm² Kit contents: Housing ( shell) Gel filling Cable ties Cross separator Electrical connectors not included. They can be purchased at our other auctions (in a size adapted to the housing, e.g. WAGO, Scotchlok, track cubes, KLI/KLE connectors, etc.) The most important advantages: Ability to make multiple connections High mechanical strength at a wide range of operating temperatures Quick, trouble-free installation Cross-linked gel mass in a two-piece shell (no additional insulation required) Versatility of use, even in immersion conditions High water resistance High level of electrical insulation Protection against moving wires High resistance to chemicals or UV rays Long life - no expiry date Composition and characteristics: Two-piece openable body polypropylene with a patented waterproof system, with longitudinal ribs serving as a container for the insulating gel. There are special walls at both ends of the joint, preventing the gel from flowing out, while ensuring watertightness Longitudinal movement of wires is limited thanks to the additional ribs at the ends of the joint and the use of cable ties attached to each package Patented separator consisting of two plates with a locking latch, which allow two-sided connection and two protrusions that block the plates At the end of each joint there are two holes for placing and attaching cable ties . The body of the joint can be opened only with tools compliant with the CEI 64-8 standard. Easy and quick installation. Insulate the wires and clamp them with terminals or connect them in any electrical connector. Put the entire connection in the gel and lock the wires at both ends of the joint with the supplied cable ties. Close the joint with the latches - make sure that a small amount of gel comes out of the joint from both ends, which guarantees tightness and insulation of electrical connections. Ingress protection IP68 The IP system means the degree of protection provided by the housing in accordance with the PN-EN 60529:2003 standard. The presented product has the following properties: protection against access to hazardous parts with a wire dustproof protection protection against the effects of continuous immersion in water (housing is constantly immersed in water, under conditions agreed between the manufacturer and the user) Norms and standards: EN 50393 (0.6/1 kV) EN 60529 RoHS Directive 2011/65/EC 20-37/2-1, 20-37/7 EN 60695-2-11

(Price for 1 Pcs)

Important information!

Please read the following information to avoid misunderstandings during purchase and shipping.

Shipping:

Due to eBay selling limits, we do not display the full stock quantity.
If you wish to buy more items than are available in our listings,
please contact us via eBay message;
Please specify the quantity you would like to purchase,
shipping location:
country, city, postal code.
Shipping type, economy, standard, express.
We will prepare an offer for you with one shipping cost.

If you bought multiple items from our listing,
eBay charges multiple shipping fees: don't worry about it.
If possible, our shipping department will refund you the overpaid shipping costs through eBay .
We only charge the actual shipping cost.                                                                        
Shipping cost depends on the dimensions and weight of the package .
 
We ship from Poland – the European Union .

We ship worldwide.

If your country is not on the shipping list – please send us a message via eBay, and we will provide you with a shipping quote.

Regarding international transactions, the delivery time depends on weather conditions, pandemics, customs policy, national holidays, etc.
Should you have any other questions – please feel free to contact us.

Invoice

We issue 0% VAT invoices .
(Information for businesses registered within the European Union and having an EU VAT number, we issue an invoice with 0% VAT, the auction price does not include VAT)

Returns

We accept returns in accordance with eBay’s terms and conditions.
If you are not satisfied with the product – please contact us.

WELCOME TO OUR OTHER AUCTIONS