UYGALAXY Greenhouse Film Roll Up Motors with Limit Switch and Creeper (2 Packs) + Transformer Controller Joint Box (AC110V to DC24V) for Chicken Coop Greenhouse Ventilation System, Automatic Venting

INV#: 1023092127

About this item

【 Roll up motor + Converter controller】All-In-One kit with wall plug. Automatic agriculture with switches, free your hands and work easier.
【 100W Power Roll Up Motor 】Film tube length up to 360ft, 12.9ft height. Safe DC24V 2.8RPM greenhouse roll up side motor with limit switch.
【 2 Install Ways】Can be installed on side of the greenhouse, also the top rolling, control 2 motors for even venting.
【 Easy Use 】One button to open/stop/close the venting machine, setting the limit switch on hoop house roll up ventilation motors, no second time setting.
【 Wide Use 】Water Resistance. Suitable for breeding greenhouses, chicken coop greenhouses, flower greenhouses, fruit greenhouses.

Useful in Your Greenhouse

Package Include:

1* Joint Box (transformer+Controller)
2* Roll Up Motors
2* Creepers

The electric roll-up motor for ventilation, which is used extensively in the greenhouse. Such as the solar greenhouse, vegetable greenhouse, cultivation greenhouse, multi-span film greenhouse and other assembled greenhouse, by which to open or close the side windows and top windows through the roll of film.

UYGALAXY Greenhouse Roll Up Motor System

IP66 waterproof protection class.
Compact size and low noise, easy installation.
Can side of the roll, also can top roll.
Roll up tube length from 5~360ft, climb 10ft height when ID 1/2" NPS (DN15) roll tube, climb 12.9ft height when ID 3/4" NPS (DN20) roll tube.
Setting the limit switches on hoop house roll up ventilation motors, roll up motor and climber work perfectly together
Tips:
After the installation of the roll up motor, be sure to cover the waterproof cover to prevent water.
It's suggested to use 16 AWG wires for motors if the wire is within 165ft (50m), the extension wire is not included.
Use ID 3/4" NPS (DN20) tube for the creeper.

Roll Up Machine

Side Ventilation of Greenhouse

Roll Tube Size: 5ft~360ft
Power: 100 watt
Adjust Roll: 40 limits
Voltage: DC 24v
Speed: 2.8 rpm
Rated Current: 4.0A
Torque: 80 N.m
Protection Class: IP66

Max roll tube length: 360ft(110m)
Climb 10ft height when ID 1/2" NPS roll bar
Climb 12.9ft height when ID 3/4" NPS roll bar
Max lift 1320lbs (600kg)

Accessories

2*Roll bar adaptors
5*Screws of M8x25
1*Bolt of M6x55
1*Nut of M6


Roll Bar Adapter The original bronze color adapter fits for ID 3/4" NPS(DN20mm) galvanized tubing, roll bar travel is 12.9ft. Insert the blue shaft washer helps to fit for ID 1/2" NPS(DN15mm) galvanized tubing, roll bar travel is 10ft.	Rotation Bar Adapter Fits for OD 1" galvanized tubing (or ID 3/4" NPS). Needs to telescope another suitable size of tubing, so the rotation bar has a enough length to make roll up bar tightly slide along the roof flame.	The Limit Switch Press the knob and rotate it for setting limits, it's invalid without press down. The waterproof lid to keep upper water resistance, please close it after setting up the limit switches.

Knob: Fuses
Swith1: ON/OFF
Swith2: Open/Stop/Close Window

Switch Style: Maintained (switch the toggles, the motors will keep running until the limit is reached.)

Roll Up Motor Controller

Input: AC 110V
Output: DC 24V
Plug wire (input) length: 4.75ft
Bare wire (output) length: 1.6ft
Joint box: Transformer + control
Size: 9 x 6 x 3.8 inches

1.The motor with limit switch would stop once hitting the limit.
2.Two 10A fuses for two channel of outputs.
3.Please install it inside the house.
4.The product is without timer, it's main for transforming the voltage and controlling the motors.