CNC Kit 5 Axis With Nema17 39oz-in Stepper Motor & EMA2-040D22 Stepper Driver
/12
Descriptions
ENGMATE™ 5 Axis Kit for CNC DIY
1*5 Axis Breakout Board + 5*EMA2-040D22 Microstep Motor Drivers + 5*EMA172-3408S4 Nema17 39oz-in Stepper Motors + 1*24V 10A Switching Power Supply
The upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, KCAM4, etc. parallel-control CNC software.
Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board.
The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.
Why Purchase CNC Products in our store?
 |  |  |
10+ Years Rich Experience | High Quality Product | Professional After-Sale Service |
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have. | Stepper motors and drivers from ENGMATE™ are with high quality for stable and durable usage. | The professional technical support and excellent after-sales service are backed up by a loyal and experienced team. |
5 Axis Breakout Board
- • High performance, cost-effective
- • Maximum support 5-axis stepper motor driver controllers
- • Compatible with MACH3 etc. parallel-control CNC software
- • USB power supply and peripherals powered phase are separated to protect computer security
- • All the signals are opto-isolated which can protect your computer security
- • 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc
- • Wide input voltage range: 12-24V, and with anti-reverse function
- • One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc
- • Compatible with all the 2 phase microstep drivers in the market
- • Output 0-10V analog voltage for inverter to control the spindle speed
- • Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S
- • Amplification, filtering, enhancement processing drivers enable signal
Digital Hybrid Microstepping Driver (EMA2-040D22)
- • Extra-low motor noise offers excellent quietness
- • Supply voltage from 20-40V DC
- • Output current programmable, with 7 stalls output current setting, from 0.5A-2.2A (Peak)
- • Adoption of 32-bit DSP, pure sine wave subdivision technology
- • Low-vibration and low temperature rising.
- • Microstep resolutions programmable, with 3 stalls microstep subdivision setting
- • Automatic half-current reduction as long as switching off SW4 when motors stop
- • Internal optical isolation, pulse input frequency up to 200KHz
- • Support PUL/DIR mode
- • Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
- • Suitable for 2-phase and 4-phase Hybrid stepper motors
Hybrid Stepper Motor (EMA172-3408S4)
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise and low vibration
- • High start torque, low start current and reliable performance
- • Simple 4 wires ensure easier wiring, installation and maintenance
24V 10A Switching Power Supply
- • High efficiency, high reliability, low cost
- • Adjustable ±10% Output Voltage support
- • PWM control and regulation, insure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
Common-anode Connection
Applications
Suitable for a variety of small sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc...
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc...
Matching Stepper Motors
| Model NO. | Min Motor Size | Max Motor Size | Recommended Supply Voltage | Recommended ENGMATE Stepper Motors |
| EMA2-040D15 | NEMA 8 | NEMA 17 | 24V DC | EMA112-4506S4, EMA162-3805S4 |
| EMA2-040D22 | NEMA 8 | NEMA 17 | 24V DC | EMA082-4208S4, EMA142-4520S4 |
| EMA2-050D42 | NEMA 17 | NEMA 23 | 24V/36V DC | EMA172-6015S4, EMA232-5615S4 |
| EMA2-050D56 | NEMA 23 | NEMA 34 | 36V DC | EMA232-7630S4, EMA232-11235S4 |
| EMA2-070D56 | NEMA 23 | NEMA 34 | 48V DC | EMA242-8840S4, EMA342-7842S4 |
| EMA2-080D72 | NEMA 23 | NEMA 34 | 60V DC | EMA342-10050S4, EMA342-15662S4 |
| EMA2-080A72 | NEMA 34 | NEMA 42 | 80V DC | EMA422-15065S4 |
| EMA2-220A80 | NEMA 34 | NEMA 52 | 110V/220V AC | EMA422-20180S4 |
 | ||||
Specifications
| Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C) | ||
| Input Voltage | Get power from PC via USB port and 12-24V power supply for limit/Estop switch |  |
| Drive Type | Pulse and Direction Signal Control(EMA2-040D15/EMA2-040D22) | |
| Suitable Microstep Driver | 2 Phase Microstep Driver | |
| Net Weight | Approx 75g | |
| Dimension | 90*70*20mm (L*W*H) | |
| EMA2-040D22 Stepper Driver | ||
| Model NO. | EMA2-040D22 |  |
| Input Voltage | 20-40V DC | |
| Output Current | 0.5A-2.2A (Peak) | |
| Pulse Input Frequency | 200KHz | |
| Cooling Method | Natural Cooling or Fan Forced cooling | |
| Environment | Avoid dust, oil fog, corrosive gas | |
| Ambient Temperature | 0°C~50°C (32°F~122°F) | |
| Operating Temperature | 70°C (158°F) Max | |
| Storage Temperature | -20°C~65°C (-4°F~149°F) | |
| Humidity | 40%RH-90%RH | |
| Dimension (WxHxD) | 86×55×20mm | |
| Weight | 130g | |
| Suitable Motor | Nema 8, Nema 11, Nema 14, Nema 16, Nema 17 | |
| EMA172-3408S4 Nema17 Stepper Motor | ||
| Model NO. | EMA172-3408S4 |  |
| Motor Type | 2-Phase | |
| Step Angle (°) | 1.8 | |
| Rated Voltage (V) | 4.8 | |
| Rated Current (A) | 0.84 | |
| Phase Resistance (Ω) | 5.75 | |
| Phase Inductance (mH) | 8 | |
| Holding Torque (N.m/oz-in) | 0.27/39 | |
| Rotor Inertia (g.cm²) | 34 | |
| Motor Length (mm/in.) | 34/1.34 | |
| Frame Size (mm/in.) | 42/1.65 | |
| Lead No. | 4 | |
| Shaft | Single | |
| Motor Weight (kg) | 0.22 | |
| 250W 24V 10A Switching Power Supply 110/220V Switchable Temperature Control | ||
| Input Voltage Range | 110VAC/ 220VAC±20% (selected by switch) |  |
| Input Frequency | 47~63Hz | |
| Output Voltage | 24V | |
| Rated Output Current | 10A | |
| Output Voltage Adjustment Range | ±10% | |
| Weight | 820g | |
Content
| Estimated Delivery Time | ||
| Country/Region |
Standard (Business Days) |
Express (Business Days) |
| UK, EU (27 Countries) | 6 - 12 | 4 - 6 |
| Other European Countries | 6 - 15 | 4 - 7 |
| USA, Canada, Mexico | 5 - 10 | 3 - 5 |
| Australia, New Zealand, South Asia, East Asia | 7 - 12 | 3 - 5 |
| South America, Other Countries/ Regions | 15 - 25 | varying |
Remarks
- • Usually, we dispatch your order within ONE to Three WORKING DAYs upon receipt of full payment when stock lasts.
- • Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
- • For fixed-time delivery or any special needs, please do contact and confirm with us BEFORE placing order.
Duties-and-Taxes
- • Under EU VAT rules, all goods sold to EU are subject to VAT at local rate.
- • Starting 1 July 2021, eBay will collect VAT on certain orders delivered to EU addresses, on behalf of customers local tax authorities. When you see VAT is included/collected on invoice after cleared payment, you can just wait for the parcel to arrive at your door. Estimated delivery time is 4-12 business days, varies between destination countries and delivery services chosen.
- • For orders above a certian value, eBay will not collect VAT at checkout, buyers are required to declare and pay tax at point of import.
- To facilitate smooth customs clearance, we work with world's leading international couriers (i.e. FedEx, DHL) to ship your parcel via commercial grade express delivery service. The courier will properly handle customs duty and tax declaration when importing the parcel. You don't need to contact or visit customs/tax office in person. All you need to do is to pay your tax fees on delivery. Parcels will be delivered within 4-6 business days to most EU addresses under such arrangement.
Satisfaction Guaranteed
30 Days Money Back Guarantee
- If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.
Free Replacement
- If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
- We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
- • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
- • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.