Mini cylinder head kit (K100 8 valve) with all BMW parts
The picture shows a Mini engine with a kit installed.This kit contains all of the used BMW motorcycle parts usually required when converting your A series engine to the BMW K series DOHC cylinder head and fuel injection: head, cams, valves, rocker cover, injectors, throttle bodies, throttle position switch, fuel rail, bolts, connectors and caps.
Kits can be tailored to your requirements eg. with different cams, or without injectors if you are using carbs. Please call 01484 353 600 to discuss your requirements or if you have any questions regarding these kits.
Parts are supplied in unmodified, used condition with a limited 6 month warranty.
We can also supply any additional new BMW motorcycle parts you require for the job e.g. valve stem seals, shims, studs etc. A 10% discount will apply to any new parts bought at the same time as the kit.
We offer full after sales advice and support in regard to the BMW side of the project. Companies such as Specialist Components can supply the special (non BMW) parts and Mini expertise required to complete the project e.g. cam pulleys, seals, belts and head gaskets of varying thickness to alter compression.
All of the combustion chambers were designed to work with flat top pistons. All heads have valve seats suitable for use with unleaded fuel. This is the two valve per cylinder head.
It was designed for a 67mm bore. Advantages over the 16 valve kits include low cost, simplicity and ready availability.
Valve clearances can be adjusted without removing camshafts (shims on top of buckets) using valve shimming tool our part no. TOA14020.
This head may be better suited to road cars and turbo or supercharged applications. The bike engine it comes from is rated at approx. 90bhp.
Motorworks part number: ENK00001
Series part number KKK00000 L4