Traditional Wooden Tongue and Groove Gate
1829mm High x 762mm Wide
(6' High x 2'6" Wide)
Manufactured From:
94mm x 44mm Stiles and Top Rail
145mm x 28mm Center and Bottom Rail
145mm x 28mm Bracing
All our Softwood Timber is a Planed 5th Scandinavian redwood (High quality pine)
Mortised and Tenoned
14mm Tongue and groove boards (finished size)
Due to transportation purposes there is a slight horn left on the bottom of the gates, this will need removing before fitting.
These Gates Can be Made to Measure.
All our Products are Made by Hand by Us.
We are a Small Family Business which Prides itself on Customer Service and Customer Satisfaction.
Because of the weight of these, we recommend hook and bands (not conventional hinges) to hang these Gates/Doors.
Product Care
This Product Care Information will give you some basic
guidelines to make sure that the Products that you have
purchased are treated correctly for external use.
Wood is a Natural Product which can be affected by Weather
Conditions, Failure to treat Correctly will result in the Timber
Swelling, Warping, Splitting, Cracking and Bowing.
There are a few basic tips that can also help keep your
products looking good for years. Whatever Timber you decide.
● If you are not ready to hang, please Treat (untreated
softwood) as soon as possible.
● Keep them stored flat until ready to hang.
● Remember to Treat at regular intervals, or when needed.
● Pay particular attention to all end Grains and Joint areas.
● As the Gates / Doors settle down treat any area around
Joints or Treat / Paint Cracks that appear.
PLEASE TREAT BEFORE HANGING
● We recommend at least 3 coats of a SOLVENT based product,
always remember to Treat all Six sides. This includes Front, Back,
Both Sides and Top and Bottom.
● Staining, Do Not use a Water Based Product, these can cause the
Timber to reabsorb water and allow Rot to set in.
● Painting, we recommend using a wood preserver to use as a Base Coat to seal the Timber (actively prevents Rot and Decay). Followed by an Under coat and Several Coats of Paint.
All our products are made to order and take approx 4 weeks at the moment from cleared funds for delivery.
We use a Courier to deliver all our products, so we will need a Contact Number with all Purchases.
All Orders will be delivered Monday to Friday as Standard.
Once an Order has been placed we will be able to give an Estimated delivery date.
If you are in urgent need for any of our items please give us a call.
Please Take a Look in our Shop for Many other Styles and Products,
We also offer all Designs in either Tanalised Timber or Cedar.
We can now manufacture all of our timber products from
Thermowood. A Timber which has been through a
Thermal Modification Process, so no additional treatment needed.
Thermowood is an environmentally and fully recyclable product.
Please ask for a quote
Thermal Modification
The process involves heating timber to a temperature of 180-220 degrees Celsius which darkens the colour. While at the same time protecting it with steam. 100% Natural no chemicals are added.
Thermowood is an environmentally friendly and fully recyclable product. It remains dimensionally stable and the moisture content is also permanently reduced. The moisture content decreases to around 4-6 percent and does not react to changes in humidity drastically as untreated Timber.
The cells of wood are modified and that caused changes in the wood characteristics. Resin is removed from the Timber and the process also decreases water absorption.
The Timber can be stained or painted.
If you would like any other Information or Advice on any of our Products
you can contact us via Ebay.
The Postage and Packaging charges given on this listing are for
UK Mainland only!
If you require delivery to another destination please contact us.