SILVER SHEET SOLDER SOFT
EASY FLOW SOFT 65%
1 DWT – SHEET 1" SQUARE
Silver
solder sheets used in Jewelry making, repair work such as sizing and mounting,
for assembling silver jewelry, rings and components.
Silver
solder comes in 4 grades… the
grades are the relative temperature flow points between one and the
other. The softer the solder the less content of silver with a lower
melting temperature.
Silver
Solder comes in 4 different Grades of Hardness.
- Extra Soft Content of Silver 56%
🟢 Easy Soft Content of
Silver 65%
- Medium Content of Silver
70%
- Hard Content of Silver 75%
This is for Easy
Soft Silver Solder Sheet Strip measures approximately 1"x 1" Square,
weight is 1 dwt (1.5g). The melting
point is 1260o F - 682oC. with a Silver
Content of 65%
🔸 Attention: Solder
is made to be used with a Torch, NOT with soldering gun or iron.
🟢 We also sell the Flux for the solder
visit our store see ebay listing >> https://www.ebay.com/itm/201274688116
Solder is Cadmium, Lead & Indium FREE 
Technical Information: -
Repairs: Lower-temperature
solder is recommended for repair work, especially on pieces that may have been
reworked and a high-temperature solder may cause a problem.
Assembly
Work: In multiple components, soldering use the
Higher Temperature Solder first, then a medium grade, and finally to a soft
lower melting point.
Production: High-temperature
solder, the Hard grade should be used, with the higher silver content, better
match of color, and a stronger bond. Allowing future repairs to be performed
with the softer solders.
JETS Product # 1925-451S
Attention: This
solder is made to be used with a high heat torch or butane torch in order to
reach melting temperature, it is not intended to be used with soldering iron.
NOTE: Visit JETS INC. our eBay Store, where you can see other grades of Solder along with listings for Flux, Alloy Metals, Brass, Copper, and Zinc, various gauges of Copper & Brass Wires, and a selection of Jewelers Equipment Tools and Supplies. JETSINC.
E1 613 Rd0 623 CKSP