Premium quality electric under laminate and wood heating from
Price includes
Features
Tough, Safe, Long Lasting Wire
Maintenance
Ultimate Comfort
Product Details
Thermostat
Please see our other listings for full details on the thermostats.
Total Tiles Store
All digital models are fully programmable with timer functions.
Heat Mat Size
Before selecting your heating, it is vital to ensure you have the correct size heat mat to suit your room. The correct size is required as the wire CANNOT be reduced or extended.
It is always best to have a little less heating than some left over!
Fitting Instructions (Full detailed installation instructions are included with the product)
Arrangements of the heat mat
Electrical Considerations
Technical Data
Power Supply | AC230V +/- 10% 50/60Hz |
Output | 140W/m² |
Cable Spacing | 50mm |
Cable Diameter | 1mm |
Conductor Insulation | Fluoropolymer |
IP Rating (Mat Only) | IPX7 |
Cable Construction | Twin conductor |
Earth Type | Aluminium Mat |
Certification | CE & ROHS |
Max Installation Temp. | 30ºC |
Min Installation Temp. |
5ºC |
Insulation
We recommend the use of a good quality insulating underlay with a high tog value. If installing the heating onto a uninsulated concrete floor, insulation boards can be installed under the underlay for maximum efficiency. Insulation boards reduce heat-up times and running costs by up to 50%. This means they can pay for themselves in just 2-3 years.
Frequently Asked Questions
What type of flooring can be used with BodenWärme Foil underfloor heating?
Most good quality laminate and engineered wood floors are suitable. Always check the specific flooring manufacturers instructions.
Will BodenWärme floor heating warm the room as well as the floor?
Yes, if the room is adequately insulated & Marmox insulation boards are used it can be used as the only source of heating.
Can the heating cable be shortened or extended?
No! It is vital that the correct size heat mat is used. If you are unsure which size to purchase we can work this out for you. Simply draw out your floor plan with all measurements including all furniture items without legs of at least 60mm and a free flowing air gap underneath, and send these across to us at the business details below.
How much will it cost to run?
Several factors will affect this including insulation & other heat sources. An average cost is approximately 1.2p per square meter per hour.
How reliable is BodenWärme underfloor heating?
This dual core heating model has been on the UK market for over 8 years now & to date there has been NO cases of a product developing a fault due to a manufacturing defect after installation.
What type of underlay should I use?
The underlay must be specifically suitable for use with electric underfloor heating. The insulating properties of the underlay are important to reduce heat up times and increase efficiency. The higher the R value the better. Take care not to select an underlay designed for warm water underfloor heating systems. These are designed with low insulation values as with these systems the heat needs to pass through the underlay. If an insulation board is being used, an underlay must be installed on top as the hard surface of the insulation board will cause damage to the foil heating. The correct underlay can be purchased at https://www.ebay.co.uk/itm/Laminate-Wood-Underlay-Insulation-for-Electric-Underfloor-Heating-9-7m-/191601219371
Can I use this heating with other floor coverings such as tiles?
No, this type of underfloor heating is only suitable for use with laminate and wood flooring.
How quickly can I use the heating after I have laid the flooring?
The heating should be left off for 2 weeks after installation to allow the wood to acclimatise. It should then be turned on at a low temperature and increased by a few degrees a day.
Can I control more than 1 room with a single thermostat?
We recommend that each room should have a separate thermostat fitted. This ensures accurate temperature control, provides energy savings and makes installation easier.
Should I use the air or floor temperature sensor on the thermostat?
It is VERY IMPORTANT that the FLOOR ONLY temperature sensor on the thermostat should be selected. This will prevent overheating and potential damage to the flooring.
If your question isn't covered on this listing please either message us through eBay or give us a call on the number in our business details below.
Total Tiles Ltd
All prices include VAT @ 20% VAT Reg No. 121 890 721
If you have any questions about any of our products please contact us & we will reply as quickly as possible. Although we are new to eBay we have been selling underfloor heating, tiles, stone and other tiling related products for over 15 years.
After buying an item, payment must be made within 7 days.
All orders are dispatched within one working day from when payment is received. We endeavor to dispatch all orders received before 12.00 noon on the same day, workload permitting.
Orders are dispatched to the buyers Paypal address. If you would prefer delivery to an alternative address, please message us as soon as possible following payment.
Items must be checked & signed for upon receipt. If you believe the items to be damaged, please do not sign for them.
In the unlikely event you are not completely satisfied with our products or service please give us the opportunity to resolve rather than leaving negative feedback, Thanks