2-Way Convertible Component / Coaxial System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Powerful

Sold as a pair.

Product Features

  • 6-1/2" Evolution Series 2-Way Convertible Component Speaker System
  • Peak: 300 watts per set / 150 watts each side
  • RMS: 150 watts per set / 75 watts each side
  • Recommended Amp RMS: 25-75 watts each side
  • Quickly converts from coaxial to component system
  • Phase plug replaces tweeter assembly in component system mode
  • Impedance: 4 ohm
  • Top-mount depth: 2-9/16"
  • Frequency Response: 48-25,000 Hz ± 3 dB
  • Sensitivity: 93 dB
  • Efficiency: 90 dB @ 1W/1m, 96 dB @ 1W/0.5m

Woofer Specifications

  • Mineral-filled Polypropylene cone
  • Injection-moulded Polymer frame
  • Patented elevated frame cooling
  • Butyl rubber surround
  • Patented elevated frame
  • DMA-optimized motor system
  • Injection-moulded, mica-filled, Polypropylene cone
  • 1.2" Kapton former voice coil
  • Low profile, symmetrical roll spider
  • Ferrite magnet structure
  • Frame Outer Diameter (A) 6.50 in / 165 mm
  • Grille Tray Outer Diameter (B) 6.74 in / 171 mm
  • Rear Cover Outer Diameter (C) 4.08 in / 104 mm
  • Frontal Coaxial Tweeter Protrusion* (D) 0.75 in / 19 mm
  • Frontal Grille Protrusion** (E) 1.03 in / 26 mm
  • Mounting Hole Diameter (F) 5.56 in / 141 mm
  • Mounting Depth (G) 2.55 in / 65 mm

Tweeter Features

  • 1" Silk soft dome tweeter
  • FerroFluid cooling and damping
  • Neodymium magnet structure
  • Fixed Angle flush-mount
  • Surface-mount and coaxial-mount systems
  • Flush Mount Fixture Diameter (A1) 2.12 in / 54 mm
  • Surface Mount Fixture Diameter (A2) 1.93 in / 49 mm
  • Flush Mount Mounting Hole Diameter (B) 1.875 in / 48 mm
  • Flush Mount Fixture Mounting Depth (C) 0.71 in / 18 mm
  • Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
  • Surface Mount Tweeter Frontal Protrusion (D2) 0.95 in / 24 mm

Crossover Features

  • 4-Position adjustable tweeter level
  • 3-Position adjustable midrange presence
  • Polyswitch protection
  • Premium Mylar capacitors
  • Premium air-core inductors
  • 1st Order low-pass filter
  • 2nd Order high-pass filter
  • Width (W) 3.36 in / 85 mm
  • Height (H) 1.44 in / 37 mm
  • Depth (D) 4.72 in / 120 mm

Package Includes

  • Two 6-1/2" Woofers
  • Two 1" Tweeters
  • Two Crossover Networks
  • Two Surface Mount Tweeter Fixtures
  • Two Coaxial Mount Tweeter Fixtures
  • Two Flush Mount Tweeter Fixtures
  • Two Metal Spring Clips for Tweeter Fixtures
  • Two Metal Mesh Woofer Grilles with ABS Grill Tray
  • Various Terminals and fixings

FREE DELIVERY ON THIS ITEM TO ALL UK MAINLAND ADDRESSES.

 

Please note: Unless otherwise indicated, delivery to the Non-UK mainland postcodes will incur an additional surcharge of +£10. This includes the following areas: Jersey, Guernsey, Isle of Man, Isle of Wight, N. Ireland, Shetlands. Please add £10 to your PayPal payment to avoid shipping delays.