Store Categories
Why Buy From us
3 Bearing 2.2KW Spindle Motor Water Cooling D80mm & CNC VFD Inverter Driver Kit
ITEMS DESCRIPTION
无标题 1 无标题 7 无标题 5

Three Bearing Spindle Motor 2.2KW Water-cooled D80mm & VFD Inverter Driver Kit

Package Included :

1 x 2.2KW Spindle Motor: GDZ80-2.2B
1 x 3.7KW sunfar VFD Variable Frequency Drive: E550-2S0037L
1 x Cast Aluminium Bracket
1 x Cooling Pump& Pipe

 Providing the default Nut ER20 and Collet 6mm, if not please do contact us for a better solution.

Spindle Motor Specification:

Type GDZ80-2.2B 
Product type High-Speed Constant Torque Motorized Spindle Motor for CNC engraving machines
Rev 24000rpm
Power(kw) 2.2KW
Diameter(mm) Φ80*213mm
Voltage(V) 220V
Current(A) 8A
Frequency(HZ) 400Hz
Cool Water-cooled
Bearing type 2*7005C P4 DT & 1*7002C P4
Lubricate grease
collet(mm) ER20 6mm default
repair time bearing(half year), spindle(one year)
Brand Changsheng(Made in China)

VFD Specification:

Model E550-2S0037L
Power (KW) 3.7KW
Input Voltage(V) 1-phase AC 220V ±20% 50/60Hz
Output Voltage(V) 0~220v
Output Current(A) 16.5A
Output Frequency (Hz) 0~1000Hz
Origin& Warranty&brand China & One year&sunfar

 

Bracket Specifications :

Type Φ80mm Bracket
Material&Origin       Cast Aluminium& China

 Cooling Pump&5M Pipe Specifications :

Model Cooling Pump
Power  75W
Voltage(V) 220~240V AC 50Hz
Hmax 3.2M
Qmax 3000L/H
Pipe 5m

 
 
Kindly Note :

  • Motorized spindle motors are matched with inverters, choosing inverters should be according to the current, voltage, and frequency of motorized spindle motors.

  • Setting the inverter must firstly set up the basal frequency, its basal frequency is based on the highest frequency of motorized spindle motor, if not setting the basal frequency (the factory setting is 50Hz),the motorized spindle motor would burn out once start running;

  • The highest frequency, break frequency and the corresponding voltage also should be set according to the curve on the operating instruction; setting the current of the inverters is also based on the rated current of motorized spindle motor;

  • The overcurrent is 120% of rated current; overload tripping is 100%, time is 5s; 
    Carrier frequency is set by the power of spindle motor,8kHz for less than 10KW motorized spindle motor, 5kHz is for more than 10KW spindle motor;

  • The acceleration time and deceleration time are 10s and 20s respectively, if starting current exceed the rated current and need protection, it should extend the acceleration time.

  • I/O lack-phase protection also should be set above the function of protecting inverters and motorized spindle motors.

  • Connecting the inverter and the three-phase power of spindle motor, solder the inverter three-phase power cord on the plug 1(U1),2(V1),3(W1), plug 4 is ground wire. Then the inverter is connected with the external power supply and start work, then to check whether the rotation direction of spindle motor is consistent with its indication direction, if inconsistent, immediately shut down and change two wire on the three-phase power supply of connecting inverter and motorized spindle motor. The motorized spindle motor is prohibited running in the wrong rotation direction.

  • Power lines should be taken waterproof and shielding measures. The connection between motorized spindle motor and inverter should not exceed 25m.When the power cord of the water-cooled spindle motor connects the terminal block, it must be bent into U shape and fixed on the bottom of the terminal block and then connect, so that can protect the condensed water of the power cord into the terminal block.

  • Another, use shielding power lines to prevent its interference to inverter.


无标题 2
We maintain high standards of excellence and strive for hundred percent customer satisfaction.
Feedback is very important to us.
We hope that you contact us immediately before you give neutral or negative feedback, so that
we can address your concerns. It is impossible to address issues if we do not know about them!
Thank you !

1. We accept PayPal payment only
2.Payment must be received within 7 days after order is made.
3.Fees such as import duties, taxes are not included in the item price or shipping costs .

These charges are the buyer's responsibility.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business.

Our certified technicians have tested each item before shipping.
The unit comes with 1 year limited warranty on all manufacturing defects.
 
 a) If you receive a defective item, you may return it or ask for a discount. 
Please contact us within 14 days after you receive the package. 
 
b) What you returned must be intact and in its original packaging.

Fast to Buy Limited - CNC Solution is specialized in CNC parts and solutions, we supply Fanuc

Mitsubishi,Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle
motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw,
linear guide rail, 3D printer parts, etc.
If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you .

Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to jet leg, our reply to your questions may not be immediately.
But within above working time, we will reply your email within 24 hours.

If it's non-workdays,please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
 
Copyright vipwindows_168 Rights Reserved.
PushAuction

On Jul-06-20 at 20:53:15 PDT, seller added the following information:

DataCaciques