SET of FOUR BRAND NEW Genuine Delphi/Rochester Products (RP) Upgrade Fuel injectors
for
Turbocharged Isuzu Impulse and
Lotus Elan
(see specific application data below)
**** ONE YEAR WARRANTY ****
Price is for the full set of injectors.
Quantity available is the number of sets we have.
Please note: these are NEW fuel injectors. They were acquired in bulk quantities and are not individually boxed for resale. They have never been installed in a vehicle and have never contacted gasoline. We frequently purchase large lots of NOS and surplus (production overrun) Brand New fuel injectors from OE sources around the globe. Some may have a nick, scratch or very minor cosmetic flaw present from transit & handling. As with our Factory Remanufactured parts, each set of New injectors is also fully bench tested & flow matched at the 2nd Largest Fuel Injection Specialty Company in N. America to confirm they meet all OEM specs prior to shipping. This gives you the best of both worlds …Brand New fuel injectors at Remanufactured injector prices.
These injectors fit:
1991 & 1992 Isuzu
Impulse 1.6L 4 cyl. Turbocharged
and
1991 & 1992 Lotus
Elan 1.6L
4 cyl. Turbocharged
SPECS & Interchange Information:
Resistance 2.5
Ohms
Flow Rate 310-315 cc/min (30 Lbs/Hr. at 43.5 psi fuel pressure)
Delphi (then called Rochester) was the OEM supplier to Lotus and Isuzu in 1991 and 1992 for the above applications. These are also Genuine Delphi/Rochester parts but are a later production SIX Spray Hole Upgrade design injectors. All fuel and electrical specs, dimensions, color, connector and physical appearance are 100% identical to the OE 17105385 and 17089116 Lotus/Isuzu units.
The component/stamping number has been obscured to avoid cross reference and interchange data conflicts. So if you are a Lotus fanatic and plan to enter your car in a Concours event, you will lose judging points since these are not "numbers matching" parts.
If you have a Turbocharged Lotus or Isuzu vehicle listed here and want to restore its performance to like new, this set of Brand New Delphi Injectors is just what you need. And the price is competitive with a quality brand of "rebuilt" injectors!
I have a limited supply and may not be able to get more in. Don’t snooze!
If your vehicle is listed here, these parts are correct for it. All the application & interchange information was researched and verified by Wrenchhead's NEXCAT Electronic Catalog & database. NEXCAT is the major provider of Electronic Data to Auto Parts Retailers & Professional Installers in North America.
FAQ’s
Q)
Are
your fuel injectors really “BRAND NEW”
parts?
A)
We
specialize in selling Brand New injectors at extremely low prices, but also
offer Factory Remanufactured fuel injector sets. All of my Ebay listings are clearly
and accurately described as either “Brand New OEM Injectors”, “Brand New
Injectors” or as “Factory Remanufactured Injectors”. We are also the exclusive online
distributor for “Xtreme High Performance” and “Xtreme Upgrade” product line of
Fuel Injectors. All of the Factory Remanufactured Injectors we sell are professionally
remanufactured at the 2nd largest Fuel Injector Remanufacturing
Production facility in
Q)
How can
you sell BRAND NEW fuel injectors so cheap?
A)
We get
asked this question often. Having been in the Auto Parts business for over 40
years, I’ve worked for Warehouse Distributors, owned & operated Retail Auto
Parts Stores, served in a Regional and National Management capacity for three
Major Auto Parts Manufacturers and also pioneered an Internet Auto Parts web
site in 1998. I am now semi-retired. Selling
on Ebay is a part-time venture as an associate broker and consultant for the #
2 Fuel Injector Remanufacturer in the
Q)
How
do I know that these parts are correct for my vehicle?
A)
Every
part we sell on Ebay is thoroughly researched and cross referenced using
Wrenchhead’s NexCat electronic database and matched to OEM manufacturer’s
production data. NexCat is a professional & expensive Subscription Only
electronic auto parts catalog and informational database service used
nationwide by major auto parts manufacturers, wholesalers and retailers. Please
note that all car companies are notorious for superseding and duplicating OE
parts with new numbers from year to year when in fact, the parts are
carry-overs, identical and completely interchangeable. Also note that the number stamped in or
printed on a fuel injector is NOT necessarily the OE part number. It can also
be a component or casting/molding number. Cosmetic (color) changes & minor
modifications are also common over a part’s application & life cycle,
resulting in multiple part numbers that are identical specs. We also offer some fuel
injectors that may look slightly different than your OE parts but are the same
electrical & flow specs and critical dimensions. Those are noted as such in
their listings. Don’t just assume that because the injector “looks
different” that it will not work. Example:
we offer Brand New Denso, Bosch and Siemens-Deka injectors for certain GM, Ford
and Chrysler vehicles that are truly an upgrade in quality compared to the OEM
injectors and may look a bit different. The
bottom line is that if we list a part as fitting your particular vehicle, it
will fit and perform as good as or better than the parts you remove …Guaranteed. After 20 + years specializing in the Fuel
Injection business, with large wholesale customers all around the world,
perfection and accuracy is a necessity.
Q)
What is
the difference in a Brand New OEM part vs. a Brand New Aftermarket part?
A)
OEM parts are made by several different fuel injector manufacturers,
contracted by the car companies to supply them. Most, but not all, OE injectors
are now made by
As previously mentioned,
I do not sell any aftermarket parts that are less than OE Quality parts. Absolutely NO cheap Chinese
knock-off junk! But it’s out there all over eBay … so Caveat Emptor ...
Buyer Beware!
One final note regarding fuel injector brands: Delco (now called AC-Delco) is
not a fuel injector manufacturer. In fact they no longer make any parts. It is
now an independent marketing company, a name on a box only, but is still
associated with GM. GM sold off all their wholly-owned parts manufacturing
divisions years ago. If you buy a Delco part for a GM built vehicle the part is
sourced from the actual OE supplier … therefore it is a Genuine GM part. However, the injector inside a Delco box will
be a part made by Bosch, Siemens-Deka,
If you have any questions about any part we list or are concerned about
physical appearances or dimensions being different, just email me before
ordering for a specific, professional reply.
Q)
I want
to buy your fuel injectors since they are such a great deal but am not sure how
to install them. What do you suggest?
A)
First and foremost, please do not attempt to install fuel
injectors if you are not fully capable of the job. These are high-pressure
fuel systems and the installation requires skill and technique to avoid damage
to the injector o-rings. Most of our buyers are advanced “Do-it-yourselfers” or
qualified Professional Installers or they have a friend whose capable of doing
the install for them. If
you are planning on buying the parts yourself and taking them to a Professional
to do the installation, check
with the Service Manager or Owner of the repair shop you intend to use and tell
them that you intend to supply the parts AND read this message first:
Taking
your own parts into a Car Dealer or Professional Installer
According
to Professional Installers taking your own parts into a Car Dealer or
Independent Shop is like taking two eggs, four strips of bacon and two pieces
of toast into your local restaurant and expecting the meal for next to nothing
because you supplied the food. It is considered unethical and is in fact far
less profitable for the trade Professionals. They typically make as much profit
from the sale of repair parts as they do from the labor, depending on the job,
of course. A 50% + profit
margin on parts sales is the norm in the auto repair industry and should be
expected. Parts purchased
through a New Car Dealer are typically higher priced parts vs. those purchased
through Aftermarket sources, such as a local major brand auto parts
store.
Most Car Dealers in
metropolitan areas are owned by large corporations or “dealer groups” who
likely own several car brand dealerships. They are certainly not dishonest but
they couldn’t care less about saving you a penny! Their service bays contribute much of the
dealer’s overall profit. And most independent repair shops are also
honest, hard working small business owners. But there’s a small percentage of
Professional Installers that may resort to less than honest tactics if asked to
install parts furnished by the customer. That being the case, if you plan to
supply your own parts and have them installed by a commercial repair shop I highly suggest that you tell them
in advance, when getting an estimate of repairs, and get all the details in
writing. Many shops
simply will not install parts supplied by the customer for various reasons,
some legitimate, some not. Those few less than honest shops may agree to
install your parts … BUT:
* There will be NO warranty on the job, whatsoever.
* Tell you that the
parts you supplied are NOT the right parts or that they’re inferior
quality
and refuse to install them after your car is in the shop. This
leaves you with a
disassembled vehicle in their shop and
no choice but to buy their parts anyway.
* Overcharge you
for labor (to cover the lost profit on parts sales)
* Install your parts but
do so improperly (sabotage?) leaving you in a very bad
situation and in the process “teaching
you a lesson”. Yes, that HAS actually happened!
What I can assure you of, with complete confidence, is that any parts you buy
from us are OEM or Equal Quality parts that are 100% correct for the vehicles
we have them listed as fitting. The exception would be previously modified
vehicles or possible engine swap situations ... which are beyond our crystal
ball’s capabilities to divine.