Soldering brazing all purpose, low temperature flux Handy^® Flux is a long lasting white paste type, very durable won’t break down from prolonged heat, an all-purpose flux for use in brazing and soldering Gold, Silver, Brass, Copper and other Non-Ferrous Metals. 

Handy Flux is an active fluoride/borate-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F.  Paste formula can be cleaned up with hot water.

Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint.

Soldering Note: Clean - Surface & Joint is important and not too much Solder, good even heat over entire joint area. Clean remove oxides and other soldering residues prior to finishing.

Silver Solder Wire used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings and components.

Silver solder comes in 3 grades… the grades are the relative temperature flow points between one and the other.  The softer the solder the less content of silver with a lower melting temperature.

SALE is for Handy Flux a 7oz. bottle with Brush and 3 GRADES of SILVER Solder Wire, (Soft, Medium and Hard) 5 Feet long of each grade each,  weighting approximately 1/4Toz). - 4.85 Dwt (Total sale for 15 feet -  3/4Toz. )