| ||||||||
---|---|---|---|---|---|---|---|---|
Description: ---Use the latest M328 version software, more function than M8 version. ---The microcontroller adopts 8 MHz external crystals oscillator, better measurement accuracy ---The related resistance of affecting the accuracy use 1‰metal film resistor, and the rest also use 1%metal film resistor. ---Use backlight low-power consumption LCD screen, compared with the overall power consumption is almost negligible, convenient to read the data in the dark. ---Built-in laminated 9V batteries with external DC power jack, long time using makes more economic. ---High quality component and element ---Weight: 200g
Description: 1. A key operation with automatic shutdown
2. Battery operation is possible since shutdown current is only about 20nA
4. Automatic detection of pin layout of the detected part.
5. Measuring the current amplification coefficient of the bipolar transistor and the voltage of base - emitter threshold
6. Darlington transistors can be identified by the threshold voltage of the high current amplification factor.
7. Detection the bipolar transistor and the protection diode of MOS
8. Measuring the Gate threshold voltage and Gate capacity value of MOSFETs.
9. Up to two Resistors are measured and shown values with up to four decimal digits in the right dimension. All symbols are surrounded by the probe numbers of the Tester. So Potentiometer can also be measured. If the Potentiometer is adjusted to one of its ends, the Tester cannot differ the middle pin and the end pin.
10. The resolution of the resistance measurement is 0.1Ω, can measure up to 50MΩ
11. One capacitor can be detected and measured. It is shown value with up to four decimal digits in the right dimension. The value can be from 30pF to 100mF. The resolution can be up to 1 pF
13. Up to two diodes are shown in correct order and by diode symbol. Additionally the forward voltages are shown.
14. LED is detected as diode; the forward voltage is much higher than normal. Two-in-one LEDs are also detected as two diodes.
15. If Reverse breakdown voltage is below 4.5 V,zener diode can be identified
16. Measurement of the capacity value of a single diode in reverse direction. Bipolar Transistors can also be analysed, if you connect the Base and only one of Collector or Emitter
17. Only one measurement is needed to find out the connections of a rectifier bridge.
18. Capacitors with value below 30pF are usually not be detected, but can be measured together with a parallel diode or a parallel capacitor with at least 30pF. In this case you must subtract the capacity value of the parallel connected part.
19. Can measure inductance resistance less than 2100Ω, the Measuring range is 0.01mH – 20H, but the accuracy is not very good. The measurement result is only shown with a single component connected.
20. Testing time is about two seconds, only capacity or inductance measurement can cause longer period. Package Content: 1pcs Transistor Meter Accessories: test hook, socket
Package includes: 1PCS MK-328 TR\LCR\ESR Transistor LCR ESR tester semiconductor device analyzer M98 |
||||||||
Payment |
||||||||
| ||||||||
Shipping Policy |
||||||||
| ||||||||
Return Policy |
||||||||
We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost. | ||||||||
Contact us |
||||||||
For anything about product, price, shipping or order status, please contact us via eBay message. We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.
|
Powered by SoldEazy