Store Categories
Why Buy From us
5.5KW BT30 ATC Spindle Motor Water-cooled 220V 18000rpm High Speed CNC Engraving
ITEMS DESCRIPTION
18000rpm 5.5KW 220V 20A 2.9Nm 600Hz BT30 Water-cooled ATC Spindle Motor for CNC Engraving New

Specifications:

Model No. 120TD18Z5.5A-220V
Brand Changsheng(Made in China)
Product type three-phase asynchronous Automatic Tool Change (ATC)  Spindle motor
Power 5.5KW
Frequency 600Hz
Voltage 220V
Speed 18000r/min
Current&N.M 18A 2.9N.M
Certification ISO9001-2000
Pole number 4
Cooling Water-cooled
Lubricate grease
 Joint of nose BT30(if needed, please let us know)
Repair time bearing(half year),spindle(one year)
Weight 26KG

  Kindly note:

  • Motorized spindle motors are matched with  inverters, choosing inverters should be according to the current, voltage,  and frequency of motorized spindle motors.

  • Setting the inverter must firstly set up  the basal frequency, its basal frequency is based on the highest frequency  of motorized spindle motor, if not setting the basal frequency (the factory  setting is 50Hz),the motorized spindle motor would burn out once start  running;

  • The highest frequency, break frequency and  the corresponding voltage also should be set according to the curve on the  operating instruction; setting the current of the inverters is also based on  the rated current of motorized spindle motor;

  • The overcurrent is 120% of rated current;  overload tripping is 100%, time is 5s;
    Carrier frequency is set by the power of spindle motor,8kHz for less than  10KW motorized spindle motor, 5kHz is for more than 10KW spindle motor;

  • The acceleration time and deceleration  time are 10s and 20s respectively, if starting current exceed the rated  current and need protection, it should extend the acceleration time.

  • I/O lack-phase protection also should be  set above the function of protecting inverters and motorized spindle motors.
    Connecting the inverter and the three-phase power of spindle motor, solder  the inverter three-phase power cord on the plug 1(U1),2(V1),3(W1), plug 4 is  ground wire. Then the inverter is connected with the external power supply  and start work, then to check whether the rotation direction of spindle  motor is consistent with its indication direction, if inconsistent,  immediately shut down and change two wire on the three-phase power supply of  connecting inverter and motorized spindle motor. The motorized spindle motor  is prohibited running in the wrong rotation direction.

  • Power lines should be taken waterproof and  shielding measures. The connection between motorized spindle motor and  inverter should not exceed 25m.When the power cord of the water-cooled  spindle motor connects the terminal block, it must be bent into U shape and  fixed on the bottom of the terminal block and then connect, so that can  protect the condensed water of the power cord into the terminal block.

  • Another, use  shielding power lines to prevent its interference to inverter.

 

无标题 2
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us.
We hope that you contact us immediately before you give neutral or negative feedback,
so that we can address your concerns. It is impossible to address issues if we do not know about them! Thank you !

We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs . These charges are the buyer's responsibility.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging.

Fast to Buy Limited - CNC Solution is specialized in CNC parts and solutions, we supply Fanuc,Mitsubishi, Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide rail, 3D printer parts, etc.
If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you .

Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately.
But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.

Copyright vipwindows_168 Rights Reserved.
PushAuction

On Apr-15-19 at 23:10:07 PDT, seller added the following information:

DataCaciques