100 CFM Deliquescent Air Dryer, 2" Connections, 250 PSI Max Pressure, Dry-O-Lite Desiccant, Van Air Systems D12

The D12 is a deliquescent compressed air dryer for 100 CFM.  It's designed to remove harmful moisture from any air system using up to a 25 horsepower air compressor.  The dryer has no moving parts or power requirement, which makes it ideal for tough operating environments, intermittent flows, point of use applications, mobile equipment, and areas with electrical restrictions. How the D12 works.  The D12 consists of an epoxy lined tank filled with Dry-O-Lite desiccant tablets.  Wet air enters the bottom of the tank and flows up through these tablets, which absorb water vapor and slowly dissolve.  Liquid collects at the bottom of the tank to be drained.  Compressed air exits the top of the tank.  An F200-100 or equivalent filter should be installed immediately after the dryer to remove oil mist and particulates.  Clean dry air is now ready for use.  The benefit of the D12 relative to other drying technologies is the simplicity.  No moving parts.  No power required. Installation.  Connect air lines and add Dry-O-Lite desiccant tablets. Maintenance.  Drain liquid after each 8 hours of operation.  A manual ball valve is included.   Pro tip: use flexible tubing to collect the liquid in a container.  Consider installing a MDV-400 automatic drain with a 1" ball valve.  Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary.  A D12 dryer will consume approximately 130 lbs. of Dry-O-Lite desiccant per 2000 hours operation at peak flow (100 CFM). Specifications & Features Rated Flow Capacities: 100 CFM @ 100 PSIG; 122 CFM @ 125 PSIG; 144 CFM @ 150 PSIG. 250 PSI Maximum Working Pressure ASME Code Certified Carbon Steel Vessel, with Enamel Exterior Coating and Internal Epoxy Lining 2" NPT(f) Inlet and Outlet Connections 1/2" Ball Valve Included 2 Site Glasses for Desiccant Level Monitoring Dimensions: 51" (h) x 12" (diameter), 130 lbs. Empty Up to 20⁰ F Dew Point Suppression 10 Year Vessel Warranty What's Included (1) Model D12 Dryer (1) Manual Drain Valve Recommended Accessories Autodrain MDV-400I 1" After-Filter F200-100-1-B-MD-PD6 Dry-O-Lite Desiccant, 150 Lb Required Technical Documents Operation and Instruction Manual Dimensional Drawing Shipping The D12 compressed air dryer and 3 x 50 lbs. pails of Dry-O-Lite desiccant ship to addresses in the lower 48 U.S. states for free.  The dryer is boxed and strapped to a pallet.  The Dry-O-Lite pails are also strapped to the pallet and shrink wrapped.  The shipping weight is approximately 375 lbs.  The ship-to site must have a forklift or loading dock to unload the pallet.  For lift gate service to addresses without forklift access, contact us.  Additional charges may apply.  Filter and auto drain accessories, if purchased, will be shipped separately by UPS Ground.

100 CFM Deliquescent Air Dryer, 2" Connections, 250 PSI Max Pressure, Dry-O-Lite Desiccant, Van Air Systems D12

The D12 is a deliquescent compressed air dryer for 100 CFM.  It's designed to remove harmful moisture from any air system using up to a 25 horsepower air compressor.  The dryer has no moving parts or power requirement, which makes it ideal for tough operating environments, intermittent flows, point of use applications, mobile equipment, and areas with electrical restrictions.

How the D12 works.  The D12 consists of an epoxy lined tank filled with Dry-O-Lite desiccant tablets.  Wet air enters the bottom of the tank and flows up through these tablets, which absorb water vapor and slowly dissolve.  Liquid collects at the bottom of the tank to be drained.  Compressed air exits the top of the tank.  An F200-100 or equivalent filter should be installed immediately after the dryer to remove oil mist and particulates.  Clean dry air is now ready for use.  The benefit of the D12 relative to other drying technologies is the simplicity.  No moving parts.  No power required.

Installation.  Connect air lines and add Dry-O-Lite desiccant tablets.

MaintenanceDrain liquid after each 8 hours of operation.  A manual ball valve is included.   Pro tip: use flexible tubing to collect the liquid in a container.  Consider installing a MDV-400 automatic drain with a 1" ball valve.  Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary.  A D12 dryer will consume approximately 130 lbs. of Dry-O-Lite desiccant per 2000 hours operation at peak flow (100 CFM).

Specifications & Features

  • Rated Flow Capacities: 100 CFM @ 100 PSIG; 122 CFM @ 125 PSIG; 144 CFM @ 150 PSIG.
  • 250 PSI Maximum Working Pressure
  • ASME Code Certified Carbon Steel Vessel, with Enamel Exterior Coating and Internal Epoxy Lining
  • 2" NPT(f) Inlet and Outlet Connections
  • 1/2" Ball Valve Included
  • 2 Site Glasses for Desiccant Level Monitoring
  • Dimensions: 51" (h) x 12" (diameter), 130 lbs. Empty
  • Up to 20⁰ F Dew Point Suppression
  • 10 Year Vessel Warranty

What's Included

  • (1) Model D12 Dryer
  • (1) Manual Drain Valve

Recommended Accessories

Technical Documents

Shipping

The D12 compressed air dryer and 3 x 50 lbs. pails of Dry-O-Lite desiccant ship to addresses in the lower 48 U.S. states for free.  The dryer is boxed and strapped to a pallet.  The Dry-O-Lite pails are also strapped to the pallet and shrink wrapped.  The shipping weight is approximately 375 lbs.  The ship-to site must have a forklift or loading dock to unload the pallet.  For lift gate service to addresses without forklift access, contact us.  Additional charges may apply.  Filter and auto drain accessories, if purchased, will be shipped separately by UPS Ground.

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

eBay should update your Freight cost into the checkout process once you have committed to purchase.

If checkout gets stuck and does not allow you to proceed, simply use your browser's Back button to return to the Pay Now option and try again.

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Moisture Boss, LLC

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.