Notice!Notice!Notice!
This item do not include the power adapter,you need to buy an extra power adapter according to your requirement.So it only suitable for PoE professional customers.
52V Power adapter links:
52V1.85A http://www.ebay.com/itm/201863649634
52V2.7A http://www.ebay.com/itm/192137824001
48V Power adapter links:
48V2A http://www.ebay.com/itm/191880113415
48V3A http://www.ebay.com/itm/201384084416
802.3af (802.3at Type 1) PoE device, We suggest DC 44V-57V power adapter.
802.3at Type 2 PoE+(plus) device, We suggest DC50V-57V power adapter.
Please refer to the Wikipedia "Power over Ethernet" section, under the "Standard implementation" paragraph.
(Usually for ensure the power supply is stable for a long time. it is recommended not to let the power load exceeds 80% of nominal value. so please choose a more suitable power adapter according to the number of camera you intend to connect and the total power. For example, you intend to connect 6 cameras, while each camera power consumption is 12Watt, the total power consumption is 6x12=72watt. Then select the 96Watt (48V2A) power adapter is enough. if the total power consumption is over 80watt then it is recommended to choose 144W (48V3A) power adapter.)
If your camera is with word “12V/PoE” as this picture shows, then please select 48V Power Adapter, do not select 12V Power Adapter.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:
DSLRKIT PMID6P2U Passive PoE Injector Switch
Power supply not included
Supports 9~55V DC power supply
DC IN port 5.5X2.5mm, inside positive (+) outside negative (-)
8 Ports (2Uplink, 6 PoE) 10/100Mbps
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Wall Mount
This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 1 Uplink ports. DC port apply 9~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "Power Link 3~8" port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 3~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
Features:
- 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
- Midspan Mode-B Unsolicited Power(4,5+/7,8-)
- Supports 9~55V DC power supply
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full/half duplex transfer mode for each port.
Specification:
|
ALL Port: |
Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。 |
|
|
Power Link Port 3-8-: |
any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) |
|
Power LED |
LED ON: power on. LED OUT: power off |
|
|
LED Light LINK/ACT |
LED ON Indicates the port is connected to a network device and has been started | |
|
LED OFF Indicates that this port is not connected to a network device or has not been started | ||
|
Standard |
IEEE 802.3 10BASE-T Ethernet |
|
IEEE 802.3u 100BASE-TX Fast Ethernet | |
|
IEEE 802.3x Full-Duplex flow control | |
|
Protocol |
CSMA/CD Ethernet |
|
Data Transfer Rate |
Ethernet: 10Mbps (Half Duplex)，20Mbps (Full Duplex) |
|
Fast Ethernet: 100Mbps (Half Duplex) ，200Mbps (Full Duplex) | |
|
IC Chips |
IC Plus IP178G |
|
Network Media(Cable) |
10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
|
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) | |
|
PoE Power on RJ45 |
Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 |
|
DC Output: 9-55V, Per port Max 1A, | |
|
Number of Ports |
8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-3 ~ port-8) |
|
Power Input |
Supports INPUT 9-55V DC power supply |
|
Power DC port 5.5 x 2.1mm, | |
|
Power Consumption |
3.2 Watts (max. no PD connected) |
|
According to the actual power consumption of equipment | |
|
Temperature |
Operation Temperature:0 ~40℃ (32 ~104℉ ) |
|
Storage Temperature: -40 ~70℃(-40 ~158℉) | |
|
Humidity |
Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing |
|
Product Dimensions |
125mm W x 68mm D x 32mm H |
|
RAM Register Capacity |
64K bytes per device |
|
MAC Address List |
1K entries per device |
|
Frame Forward Rate |
10Mbps Ethernet: 14880pps/Port |
Item Included:
DSLRKIT PMID6P2U 8pots 6PoE Passive PoE switch x1
(Power supply not included)