001-A39-49D - SPAL Centrifugal Blower - 1 Speed - 12v
SPAL Automotive is a well renowned designer & manufacturer of high quality automotive electric radiator fans & centrifugal blowers, founded in 1959 they have since become the supplier of choice for many high volume & specialist automotive manufacturers throughout the world. SPAL Automotive have extensive design, testing and manufacturing facilities that allow them to produce consistent high quality products that can withstand the most demanding conditions.
| Specification | Metric | Imperial & Other |
| Airflow Max | 590 m3/hr | 348 cfm |
| Static Pressure | 0 - 140 mm H20 | 0 - 5.6 in H20 |
| Weight | 1.4 kg | 3.08 lbs |
| Air Intlet Size | ∅ 80.0 mm | ∅ 3.15 in |
| Air Outlet Size | ∅ 78.7 mm | ∅ 3.1 in |
| Voltage | 12v | |
| Current Continuous | 16.7 - 31.1a | |
| Power Consumption | 200.4 - 373.2w | |
| Fan Speeds | Single Speed | |
| Blower Type | Single Fan | |
| Protection | IP30 Certified | |
| Warranty | 36 Months | |
| Manufacturer | SPAL Automotive | |
| Certifications | UNI EN ISO 9001:2008, ISO TS 16949, ISO 14001 | |
| Part Number | 001-A39-49D | |
This blower is supplied with a wiring harness that is approximately 200mm long.
| Wire Colour | Use | Recommended Wire Size |
| 1x Red | +12v | 3.0mm² (10 SWG) |
| 1x Black | Earth / Ground | 3.0mm² (10 SWG) |
| Plug Type | PN Connector | PN Terminals | Manufacturer |
| Female (supplied) | 180908-0 | - | AMP |
| Male (not supplied) | 180907-0 | 180384-2 (4 - 6mm²) | AMP |
This blower is single speed with no onboard resistor pack, please look at our other 3 speed blowers if you require fan control or alternatively you will need to source an external voltage controller or resistor pack.
We also carry a wide range of automotive wiring products such as relays, fuses, terminals, cable, switches & more.
- Please double check that you are ordering the correct voltage and air flow direction for your application.