Feature :

 

- Completely sealed: Prevents moisture from being trapped inside the housing
- One-way vent: Drives out moisture and avoids lens misting
- Multi-surface reflectors: Increase light output & distance
- PC lens: Impact resistance for an enhanced driving experience in any environment.

 

Fits for :

 

Specification :

 

- Condition: 100% Brand New and High Quality

- Made of materials that meet or exceed OEM requirements

- Color: Chrome Housing + Clear Lens

- Low Beam Bulb Type: H11 (bulb not included)

- High Beam Bulb Type: 9005 HB3 (bulb not included)

 

Packing List :

 

- 1 Pair of Headlights (Driver & Passenger Side)

 

Please Note :

The high beam / low beam adjusting lever is already pre-adjusted. If you'd like to re-adjustable it, will need use with professional tools.

 

Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.

2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

5. 【Test your results】