16mm (5/8") TX2 Bypass Heater Valve - Pull to Bypass
A high-quality metal valve commonly fitted to Taxi's, classic vehicles and many kit car models due to the simplicity of the design and operation. Requires a bowden cable to operate.
These are used in applications where the thermostat bypass circuit is built into the heater circuit, this will allow you to shut off flow to the heater for example whilst still allowing water to flow back to the engine.
| Specification | Metric | Imperial & Other |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Post Size | ∅ 4.5mm | ∅ 0.18" |
| Min Temperature | -40 °C | -40 °F |
| Max Temperature | 110 °C | 230 °F |
| Pressure Limit | 3 BAR (Gauge) | 43.5 PSI (Gauge) |
| Construction | Zinc Plated Steel | |
| Cable Required | Bowden Cable with Looped End | |
| Cable Movement | 30mm | |
| Operation | Pull to Bypass | |
| Part Number | 149-CDB-560 | |
ATTENTION
- Please note that this valve should only be used in a system with an added corrosion inhibitor such as glycol or anti-freeze to prevent valve corrosion.
- No bowden cable included.