Ancel BA101 Car Battery Tester 12V Digital Analyzer 2000CCA 220AH BAD Cell Test Car Tools
1. Accurate tester result in miliseconds (tolerance ±15)
2. BA101 can test CCA100-2000, 30-220Ah, which is the highest CCA in the market
3. Test batterues on and off the vehicle
4. Battery life analysis, result : good or replace
5. Test result based on JIS, EN, DIN, SAE and IEC standards.
6. Easily read LCD screen display
7. Quick test - input battery volume (AH), then it can show the battery status.
8. vehicle cranking system test - cranking time, voltage and status.
9. vehicle charging system test - load voltage, unloaded voltage, ripple status and charging system status.
10. Store the testing result, print function
 
 
a (1)
 
Customer Notes
Two Built-in Multi-Language Version
European Version: English, Spanish, French, German, Italian, Polish
Asian Version: English Japanese, Korean, Chinese
Test Data Print Out
Please leave us email address to get the print out drive and software for laptop
About the car battery type: open the car and to check on the battery. There is Battery Type and value
 
 
Ancel BA101 Test Result
Good or Replace
Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal re​​sistance value (m)
Life in percentage (%)
Cranking Test
Charging Test
a (3)
a (5)
a (9)
a (10)
a (11)
a (12)
a (6) 
Ancel BA101 Automotive 12V Vehicle Battery Testsing Steps
1. Quick test
It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second. Once input the AH value—battery rated capacity, which is marked in the label of the battery.
1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm.
2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH.
 

-1_05

3). Then press enter key, the testing result will show one of these, as below Battery test result includes 5 types as following:
 
Good Battery: The battery is without any problem, please be relaxed to use
Good, Recharge: Good battery but low current, recharge before using.
Replace: The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed.
Bad Cell, Replace:Battery interior damaged, bad cell or short circuit, replace battery.
 
 
-1_10
 
 

2. Battery In Vehicle Test

-1_051

3. Cranking Test and Charging Test

-7

Operating Parameters
System voltage: 12 Volts
Input voltage range: 9V~15V
Power requirements: No internal batteries required. Power on when hooked up during testing.
AH range: 30-220AH
 
Application
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
 

21

Package List
1* Ancel BA101
1* User Manual
1* USB Cable
 
 
DataCaciques
PushAuction